The reviews are automatic translation.
For water conservation
On 2017-07-29 15:06:13
I attached it for water saving of dripping cooling water.
I wish the regulator could also have had the orifice diameter smaller one more time, but this was enough as well.
Temperature adjustment of hot bath facility Solenoid valve (CKD AB41-02-7) used for water supply pipe failed, so purchase for replacement
On 2017-07-20 18:24:43
I tried to order a model stated in the solenoid valve currently in use and try to replace it with a failed device, but the metal part under the solenoid valve is thin like the air and the water pipe (PVC pipe) can not be connected Usage prohibited. Currently manually feeding water and adjusting the temperature of the bathtub is serious! . I thought that the lower metal part was one piece upper and lower so it was my mistake I ordered without thinking deeply. (I bought two, including spare, but two can not be used together). Since the former contractor bought and installed separately, it is planned to purchase and look for a solenoid valve with a metal part that can use 16 mm size piping again, but the caliber RC 1/4, 3 / Since it is displayed as 8, I am in trouble because I do not know which one is for 16 mm. (Because it is an amateur, I will investigate from now.)
Automatic watering to garden
On 2017-07-05 22:28:49
Purchased for automatic watering to the garden. It is under construction with a timer, nozzle (made of resin) without problems such as operation and installation.
Gas control for pilot burner
On 2017-03-23 15:00:43
Purchase as a spare item I think that performance is not a problem as it is the same specification
Replacement of defective parts (used for automatic water supply control)
On 2017-02-15 18:33:41
I arrive on the next day of ordering and I am satisfied that it operates normally after replacement. Just because the failed part is the header part, it is more pleasant to buy only that part (valve part made of brass is unnecessary).
Boiler - for bleed circuit
On 2016-11-04 15:53:11
I am very satisfied with the item I wanted.
On 2016-10-02 05:58:00
I could use it without problems. Combined with injection parts cheaply. that's all
Used for herbicide spraying switching
On 2016-07-23 17:17:47
Flow rate etc are also good, but I wanted 12V use when I made it
Replacement from waste models with air discharge.
On 2016-06-09 16:07:06
I think that it is inexpensive and better than conventional products.
On 2016-04-01 14:38:50
It was easy to install.