The reviews are automatic translation.
Repair of water heater
On 2016-07-26 10:01:11
It was an emergency, but the next day, in the morning,
Because arrived, work was able early.
On 2016-04-15 15:59:47
It was used in the check valve and the copper pipe connection. And it can be commonly used, there is no particular problem.
Oil piping, air piping
On 2015-10-12 18:22:35
It was good to have been described, for example, pressure resistance.
(It was less than sure .3.45MPa manufacturer on the homepage)
Water leakage test of brazing parts copper tube
On 2015-05-12 20:39:32
Piping on the design, insertion depth of the copper tube, need for precision piping design. It was measured as a result of 23.4mm. Also welcome when there is a G (PF) screws into the mounting screws. There are other companies there is a high price.
Air piping in the garage
On 2015-03-09 11:52:12
I had purchased the wrong size, but it was mistake orders from my misunderstanding. Such as the size of the table at the time of order, it was easy to see.
Price is helpful because it provides many attractive products.
The next opportunity also to thank you.
Piping renovation due to the ceiling bathroom dryer exchange of hot water type
On 2015-01-30 20:00:18
And existing bathroom dryer has not been piping in copper tube brazing of 8φ
Ceiling to repair attempt was to use this product for narrow can not brazing operation.
Leakage without any, it was able piping without brazing
Plumbing of the home tank
On 2015-01-19 15:42:37
Previously, I had also intended to leakage of oil is confirmed from the installed, but I feel that getting better whether there has been improvement in the ring.
Copper pipe connection of the existing
On 2014-11-14 22:53:05
The size of the ring nut is 21mm? It was good as long as an ordinary spanner size.
Grease piping of the blower
On 2012-04-25 12:51:31
It can be used as usual.
A refrigerant pipe substitute as grease piping, has been used as the connection hardware.
And us to prepare a lot more hardware, it will be saved spread variations.
Joint of cutting oil of NC lathe
On 2010-09-23 22:13:52
Hexagonal part you can fix a wide so strongly pipe!