I use LS Bell Hammer.
There are similar items, but since the lock is not attached, the oil remaining in the pipe will be leaking due to temperature change.
I can lock it, so it is comfortable without leaking.
Useful when you want to lubricate a small drop.
While tightening the root of the nozzle many times so as not to loosen, the styrene packing inside the upper cap deteriorates, the scoops sink into the container, the scraps clog the inside of the nozzle, the scraps clog the inside of the nozzle, the liquid goes out lose. So I replaced it with a rubber packing and I am thinking that the tip of 0.3 mm is the contemporary best technology
If you are looking at a machine, even if you want to lubricate a small sliding part a little, you can respond to the place that you did not want dirty and you feel good. Turning the base of the nozzle can control discharge opening and closing.
Bicycle maintenance etc.
On 2013-09-16 16:14:17
Is there some place like oiling, but oiling? I bought the second one and I put two kinds of oil respectively. Since it is possible to lubricate a small amount with a pinpoint at a place where only a large amount of oil has to be poured, there is no need to wipe off extra oil and dirt after lubrication can be avoided. I feel a little expensive, but I am convinced that it is not a consumable item.