The reviews are automatic translation.
On 2017-03-06 17:20:47
Used for threading of stainless steel. There is no whatsoever of dissatisfaction.
Stainless steel tapping process
On 2016-07-14 17:43:03
Even if it is somewhat expensive, I chose a product of trust. It is useless if you break up on the way.
Tapping of iron plate
On 2016-02-08 16:07:16
For SUS use, the stop side of the tap gauge has passed. Because it was a noisy job, I used it as it was until the end of its life.
On 2015-12-27 12:50:09
Purchased to make threads on a thick iron plate, originally for stainless steel, I cut the Don Dong mountain without breaking.
Small hole opening of radio control parts
On 2015-07-27 07:43:07
I tried to make an aluminum servo horn by myself and used it for 2 mm thread cutting, the tip was broken and clogged at the second thread cutting. Every recovery I tried to reopen failed and eventually it will not be usable. Since aluminum is fixed to the cutting edge, the mini-milling cutter cut hands to cut off cutting oil carefully so as not to apply unreasonable force, but bought a high tap to cover his immaturity Sorry for this result.
Used for landslides of nuts
On 2015-04-16 18:42:51
You can dress well.
On 2015-04-08 15:36:46
I use the same or expensive items in repeat. It is easy to use.
Tap stand of sus
On 2015-03-19 18:01:18
A nice place of OSG's tap is best for penetrating type screw stands as chips fall down.
Tap processing in machining center
On 2014-09-17 20:53:28
It got well, I was satisfied with durability so so.
On 2014-09-06 10:00:44
When assembling the control panel. Is it good?