High Roll Tap, for Steel, HRT HRT RH5 P M2.6x0.45
- HRT RH5 P M2.6x0.45
- Package Qty.
- Ship pack of
- Overall Length L (mm)
- M6 BELOW WILL BE THE SHAFT CENTER.
- High-speed-steel (high-speed steel) HSS
- TRUSCO Part Number
- Screw Length Lc (mm)
- Shank Diameter d (phi mm)
- Screw Diameter
- Pitch (mm)
- Angle Length Lk (mm)
- Angle Width K (mm)
- Lower Neck Part L1 (mm)
- Surface Processing
- Homogenized processing
Customers Who Viewed This Item Also Viewed
| 5 star
| 4 star
| 3 star
| 2 star
| 1 star
4 Customer Reviews
The reviews are automatic translation.
On 2016-05-31 14:46:55
None in particular impossible without also acceptable
Product of tapping
On 2016-03-14 16:31:38
Because it does not heavy use, it has helped us be purchased separately.
Screw hole drilling in the fragile acrylic resin
On 2012-09-12 01:18:31
It had become for steel, but I used to acrylic resin in useless source.
Thickness 2mm is threaded drilling of the acrylic resin to M3.
If the resin processed in the normal tap can not be successfully processing occurs "missing" and "galling," but, I get somewhat of machining dust in the high roll tap but was able to be processed.
However, since when processing a Hairoru under hole diameter of normal tap "distortion" and "crack" occurs, you will need to process the pilot hole diameter for Hairoru.
In addition, in order to process the large number in a row, you will need a cooling of the removal and high roll tap of machining dust. If cutting water is not it can be replaced by those that diluted dishwashing detergent (type of does not contain a polishing agent) with water.
On 2012-02-06 08:52:50
Nashi no problem
Customers Who Bought This Item Also Bought