The reviews are automatic translation.
Cutting of hardware
On 2018-06-02 03:54:56
It was a safe BOSCH product,
Although it is T-118B purchase, sharpness, blade richness is also good, can be used with confidence.
Cutting of aluminum drawing material.
On 2018-05-12 16:10:18
I was using it as if it was okay for me to cut this out of my business partners. To cut aluminum drawn material it is hard to cut for general steel materials with 24 teeth, etc. Since rough teeth with few teeth around inch are not sold at neighborhood home centers, I bought them from Monotaro.
Iron plate opening etc.
On 2018-04-14 11:30:53
Selection from length. Can be used without problems for maker items only. I will last long and decide lipid.
Temperate Bosch ★
On 2018-02-16 22:18:29
The price is expensive, but the cut is good! With the feeling I used, it seems to have durability Monotaro is always surprised when shipping is overwhelming ^ ^
Processing the door
On 2017-11-19 23:44:50
Because the width of the tooth is narrow, at about 5 mm
If you leave a pilot hole, you can use it very conveniently because it can be bent at right angle!
On 2016-05-20 17:56:39
I used it for processing drums with Bosch's jigsaw. Sharpness is also good, and there is not a dropout in the short term. As expected it is a genuine, satisfactory product of Bosch.
Panel opening cut
On 2016-04-07 18:13:42
Invincible with the use of a rechargeable jacksaw (limited to Hitachi made) that turns out anything! It is expensive, is not it ~
Cutting of hardware
On 2015-12-16 10:30:19
Previously I used long type replacement blades, but I wasted wasted parts, but this short type is okay to use the whole without waste.
Small article metal cutting
On 2015-11-29 19:12:39
I am using it for Hitachi Jigsaw, but I can work comfortably because it is difficult to break and break comfortably. Aluminum alloy etc can also be cut in a short time.
Lock notch processing of aluminum door
On 2015-07-08 17:30:23
I use it attached to Makita's small reciprocating saw. Because the eye is coarse, aluminum cutting powder is also difficult to clog and it cuts well. Although it is not suitable for soft base material, it is optimum for processing for thick plate thickness, which also shortens the working time.