The reviews are automatic translation.
Adopted in the drilling of the walls of the concrete
On 2017-02-28 09:04:11
It was used in the drilling of 10mm size,
Minute diameter is small, we were able to open comfortably
Previously, in particular I feel so because it took a significant amount of time in the open 25mm hole of.
It was very good.
Use in the through drilling of thick-walled
On 2016-08-29 17:16:20
Since the bit part does not fit into the chuck of the hand of the vibration drill, but we cut the root about 3cm but, it can be used without any problem.
To set a boundary mark
On 2016-07-08 20:48:58
You can secure the necessary depth in a narrow place
On 2016-06-23 10:52:02
It was very easy to use because there was no deviation straight to stand upright on the ground rock.
To stand upright on hard ground.
On 2016-06-22 16:49:23
Although I used it for the first time, I am satisfied without having to break or never losing the blade.
As a construction tool
On 2015-11-18 15:12:04
It is used as hole drilling of anchor material. Reduction is also good with less.
On 2015-11-10 13:48:51
I could not dig a millimeter Even if I set it to Impact mode I was doing it while I was watering But the end went round Has the stone been too hard?
On 2015-10-15 14:49:18
For drilling work
On 2014-09-24 18:13:17
I was saved because Long Kiri was not selling quite well
I use it for drilling work for the wiring of a weak electric wire.
On 2014-07-22 19:11:28
After positioning for drilling Since no misalignment occurs in the drilling process and there is no clogging of chips, it can work until penetrating without pulling out in the middle, so it also helps to shorten the working time.