The reviews are automatic translation.
Cospara is good
On 2017-04-17 09:57:02
It is necessary to have a long hole to open the test hole, it is expensive at the ordinary tool department, but it is cheap here so I bought it.
Deep drilling of wood
On 2016-08-27 18:26:41
The cut for the iron and steel, was saved cheaper than domestic. Without any problems it is available.
They drilled holes in the struts of aluminum carport.
On 2016-01-27 20:42:53
It was purchased in order to own an auxiliary bar of carport. Long drill is scheduled use of only once, but I bought because domestic products are expensive. Opponent This was enough because it is aluminum. We recommend high domestic ones if finding a hard thing and long life.
Cooling water hole of mold
On 2015-07-29 16:25:08
I tried using it but there was not any problem. In the past, I used it by re-polishing, but the hole became bigger and bent and I had a hard time. Because it is inexpensive, I would like to purchase again.
On 2015-06-29 23:29:07
For the extension of the outlet, when we were laying out the interior wiring, the floor members were thicker than expected, and the ordinary drill lacked the length, so I purchased this long drill. Thanks to that, we were able to pass the wiring through the members, and we were able to successfully expand them.
I used it for a broken bolt in the middle
On 2015-06-24 22:16:14
The impact drill is also not in the place where it is deep and the worst condition, the 2 mm long drill was saved. We need ingenuity such as suppressing blur with guide.
On 2015-04-08 23:15:56
It can be used normally. I also use a lot of other YG - 1, but I think that it is sufficient quality considering the price.
Iron, wood drilling
On 2015-01-19 21:40:40
made in China? It's cheap, so I can take it as much as I can. It is quite tough. I think that the material is also no problem. Because the grooves are cut to the root as a whole, the deflection has never broken. Even if it breaks, it can be used close to the root if it is ground. There is no core swing like cutting drum-wound steel material peculiar to China. I want to have 6 mm × 400 or 500 as well!
Long reach was necessary to drill a hole in the wall
On 2014-02-08 14:18:10
Although it is an oversea item, there was no big difference in the normal use. I do not know when using ironworks yet.
On 2013-07-25 16:56:34
Purchased as a final drill to open 8 mm hole, the 3.5 mm straight long drill mentioned above is for guidance.