The reviews are automatic translation.
Counter boring of the terminal such as a handrail
On 2014-06-16 08:44:25
We want to sell to continue while this that has been very useful
t4 mild steel drilling
On 2013-12-02 12:45:29
Garbage is below. Folding center drill before opening hole, the chip is wasted a three jump material.
Drilling of 32mm iron plate
On 2013-09-26 20:37:30
Iron plate 32㎜ the was passed through two places.
More do not use, but you can use still.
Hole saw also There is also cutting time the fact that 65㎜ was consuming.
Chip itself is weak compared to the made in Japan.
The holes in the copper per plate thickness 10mm-18φ had opened 18 locations in the drill.
On 2013-05-04 07:24:13
Blade was broken in for rotation is faster or three eyes.
Steel pipe hole drilled thickness of 2.4mm
On 2012-07-05 20:37:56
Tooth is susceptible to fracture. About 10 were drilling, but more than half of the chip is gone.
Open steel pipe hole
On 2012-03-23 13:06:13
Easy to missing teeth
Used to drill holes in the surface water conveyance in the tunnel.
On 2011-07-11 13:08:11
Drill the middle part is too long.
Stainless steel pipe of drilling, such as
On 2011-04-26 21:29:13
An attempt was made to drilling in SUS304t1.5, but would lack most of the blade in the first one
Work did not end. I do not know because the iron pipe have not tried,
The use of the SUS would like refrain.
Drilling of piping
On 2011-04-13 23:32:01
Useless center drill is idled.
Drilling of stainless steel plate
On 2011-04-02 08:15:04
You can use without if thin stainless steel plate problem.
It can also be used for stainless steel hood with a thickness of 1.2mm.