The reviews are automatic translation.
When the machine is maintenance
On 2016-10-17 07:04:55
Used to seal the threaded portion
Also the size of basis is to 1/8 Toka of the screw, this narrow linear survives.
Small seal, such as 1/8 PS screw
On 2016-08-04 18:21:42
When a small screw in the normal seal, or have a residue or there is a need to narrow. If it is this very handy to use as it is.
I wish I thing there without that had seen a big home improvement.
On 2016-02-21 15:55:01
Such as PT1 / 8, I need ordinary human labor or cut in half that's seal tape, but this is a very convenient and saves such a hassle because originally a half of the width.
Used during machine repair, piping work
On 2015-11-14 19:29:55
Because elongation is good and it is not easy to cut, I always use it
One-touch joint of air piping etc.
On 2015-01-19 09:54:52
There was something that SMC's sales person got from about 15 years ago about narrow seal tapes, and I remembered that it was very useful. After using it up I used a 13 mm tape with a razor and cut it in half. If I know that it is on the market, I wanted to use it earlier. If we put only one order, the bobbin around which the tape is rolling is for 13 mm so it will be tough to put it in a tool box or waist bag for a while. I'd like you to use something that suits your size as well.
As a sealing material for piping section
On 2014-09-02 15:50:07
When it was a commercial product, 13 mm was used many times, it was used by cutting every time, but when it is 8 mm it can be used as it is, so work efficiency has become very smooth.
On 2014-01-10 15:56:30
When it is a cheap product, most things were 13 mm, and expensive 8 mm was used. This item was very helpful at 8 mm on top of cheap price.
Seal of chemical liquid piping (1/8 to 1/4)
On 2012-10-22 19:59:39
Adjustment of the width of the seal tape (cutting) is unnecessary and very useful. Piping work time has also been shortened considerably.
On 2012-08-20 16:36:18
I was satisfied because I wanted the width to be thin
One touch Tsugite, Nipple etc
On 2012-05-02 13:53:30
I usually cut 13 mm width seal with half with scissors, but because it is 8 mm width it can be used as it is, the finish after sealing is also beautiful. From the price of 13 mm wide I think that \ 50 per winding is a valuable product. There is no 8 mm wide product in the store selling piping parts, so I will continue to buy it in a monotalrow.