The reviews are automatic translation.
On 2017-10-08 19:09:17
It was very easy to use and there was no problem. I think it's good.
Removing the pulley of the power steering pump
On 2017-06-25 16:45:17
Was not it the original use? Because the two claws can not be pulled parallel, we responded by inserting a socket wrench around the screw instead of a guide.
Also, it is difficult to put power on the handle, so it is good to have a hex head to wear eyeglasses.
On 2017-06-02 16:10:56
I think that the body is made slightly thick compared to other manufacturers, but I was able to work normally
Replacement of motor bearings
On 2017-05-03 20:37:35
I could pull the bearing out of the shaft very smoothly.
On 2017-04-30 03:41:51
The claws hooked on the bearings were too big for usability. It became a study fee.
On 2017-04-21 14:51:09
There was a width of the nail and it hit the existing feathers and it could not be used. It is mortifying. Please write the dimensions.
For motor repair
On 2017-04-09 20:37:49
I heard a noise from the motor of the range hood, so I exchanged the bearing. A trick is needed to hang on the bearing, but the purpose has been achieved.
Maintenance of electric drills
On 2017-04-06 14:42:06
It is firmly inexpensive. There is no particular problem with regard to use.
Bearing pull out from motor shaft
On 2017-03-13 19:46:19
Since the nail is thick, when the bearing on the base side of the motor is pulled out, the nail interferes with the magnet and the nail was not applied. I think that it is tough for that.
Bearing change of electric tool
On 2017-03-11 22:34:08
I used it for belt sander's bearing exchange. It was able to be used without problems. I think that this is enough if it is easy work. Thanks to this, it was cheap without submitting to maker repair.