The reviews are automatic translation.
Of PVC pipe deburring
On 2017-03-29 15:23:05
It turned up and of cut after cut in the pipe cutter, the best is to take the burrs. However, depending on the thickness of the pipe, since the middle 's central point is not fixed, I thought it was useful to have a cap, such as thin things come center.
On 2017-01-17 20:47:35
Also created a high degree of accuracy also bite very easy to handle a good low-cost is also high.
Replacement of PVC pipe
On 2016-11-06 16:49:17
I think that it is useful to chamfer.
Just scraping surface has slightly rattled.
The trick is the feeling to be in better knowing.
On 2016-02-09 20:03:32
Intends Yasukaro ... is the impression I. Internal water pressure I've used to try something affordable small for inspection, but the chamfered part is I have a slightly jagged impression, I thought a little Na as a finish.
But in size as a masking tape a few pieces of much of the affordable size is not exactly the luggage.
On 2015-12-07 22:50:52
We become indebted to. Thank you for prompt response. It is useful for copper tube stripping. If there is something again, thank you.
On 2015-10-22 11:15:08
I would like to purchase again if I have the opportunity.
Relocation of air conditioner
On 2014-10-06 18:03:15
For use in piping work for 2 minutes and 3 minutes, it is easier to handle one with smaller outline. However, the function as deburring was perfect, and the finish of the flare was also good.
Pipe deburring operation
On 2013-12-27 20:29:58
The color is darker than those of other manufacturers. It does not feel uncomfortable feeling especially using it and it is the same as the thing of other manufacturers. Although it is slightly we will receive the impression that the main body seems weak.
On 2013-10-20 20:56:00
It is ○ if the blade is a little more. The feeling I used was totally satisfying.
Air conditioning piping construction at home
On 2013-09-07 00:05:35
Although I bought it because it was cheap, the grasping part was thick and it was hard to take off the burrs and I finally finished it with a cutter. If you put a bent blade and rotate it with handles, I think that it is better for the type in which the cutting edge turns around.