The reviews are automatic translation.
c ring desorption
On 2017-02-19 15:08:25
Earlier it is not even likely to be used many times so thin, but I think that it is equivalent to the price.
On 2016-07-17 06:25:01
Accuracy is also good, we were able to work with the tightly
It is a common attachment and detachment of the snap ring
On 2014-04-20 18:47:43
The axis of the play is very large (1mm or more at the tip (perhaps 2mm nearby) deviated), it can not be used in a stable.
I thought it was cheap, but it was unfortunately so-called "cheap buy".
Although we can see a little shaved since the length of the left and right of the tip it is different, because the backlash is large
So well Ikazu, will come off when you try to open the ring and the "pin".
The structure of the tip is also perhaps have an emphasis on versatility, also the point because it is generally straight
Ring might cause easily disconnected.
I think let's tighten hit the shaft to find the time, if the amateur use, also somewhat expensive
I think it is wiser to buy a good tool.
(Note: You think the price is only the look and very cheap, from such as wall groove to enter the ring
If you are away, perhaps you use. )
Snap ring desorption
On 2012-11-15 16:31:39
(For us) special tools had been hesitant to (use less frequently), so buy, buy is attracted to the cheap price. Any failure is not.
Ahead of pliers until now to remove the snap ring of the machine was purchased since broken.
On 2012-11-15 12:29:51
The feeling I thought I Na good, but can not be used in thick earlier in the small snap ring. I think that Na may if there is a snap ring of the previous one Miri position. If there is, I would like to buy.
Mounting of the snap ring, remove
On 2012-08-18 08:20:29
Price is also It is affordable, even size It is affordable, is the oil is difficult to slip be used in the ivy state.
We use the desorption of the axis for the snap ring.
On 2011-11-18 14:39:24
Small and medium-sized, it has been buying in the previous bend and straight.
Tip is to hard to come off comes with a jagged deviation stop.
Because it is identified with pliers size by the size of the pin hole of the snap ring,
Also wondering what is less corruption.
For now, it is sufficient in this tool.
Maintenance of agricultural machinery
On 2010-12-15 15:10:28
In particular, no problem, trouble, Unfortunately not.
Remove with a snap ring of nominal diameter 3mm
On 2010-11-30 12:57:29
The minimum opening width (closed) does not work for 3mm so small ring.
Tip diameter is thin, I have misunderstood and can be used in the same way because the competitor's product and model is also the same.
I want the display of available nominal diameter.
Automobiles, motorcycles, etc.
On 2010-11-01 23:43:56
Frequency of use is low, but I think that curvature is just a good easy-to-use.