Buy more than* S$200* and get FREE SHIPPING

  • Automatic welding shade surface solar system
  • Automatic welding shade surface solar system
  • Automatic welding shade surface solar system
  • Automatic welding shade surface solar system

Automatic welding shade surface solar system AS-1

4.02 (50)
Item.#
06858415
Mfr.#
AS-1
Package Qty.
1PC
Ship pack of
1
149.90 SGD
ADD TO CART
In stock
Now we ship to...
...see all
Item Feature
Caution
At the time of non-welding work, the degree of transparency is level 4 of light blocking degree. When using welding mask, please do not interrupt arc light. As much as possible the optical sensor of the welding surface make sure to receive arc light direc, At the time of non-welding work, the degree of transparency is level 4 of light blocking degree. When using welding mask, please do not interrupt arc light. As much as possible the optical sensor of the welding surface make sure to receive arc light directly and sufficiently. To keep the sensitive degree of the changes, keep protective plates clean and transparent. Wipe clean it with a wet cloth if it gets dirty. if dirt is bad or high number of wounds, they may infect transparency of the plate and cause malfunction. So please exchange the plate. Because arc light of the welding mask has a critical value degree of sensitively, we recommend above welding current 20A. When electric current is lower than 20A, please adjust the distance of the welding mask and
Period of Service (years)
2
Infrared Ultraviolet Protection
Adaptation to DIN15
Switching Time (sec)
(To light block)0.0001, (To light unblock)0.1-0.5
Degree of Shading
#9 - #13
Power
Solar Battery (Lithium Battery x2)
Weight (g)
495
Purpose
Welding, cutting, spray, and gouging etc, Welding, cutting, spray, and gouging etc
Inner/Outer Protection Plate
Resistant to dust
Non-light Shielding
#4
Line of sight range (mm)
96x42
Filter Size (mm)
110x90x8
Operating Temperature Range (deg C)
-10 - 65
Customer Reviews
5 star 29
4 star 8
3 star 4
2 star 3
1 star 6
Review Rating: 4.02
50 Customer Reviews
The reviews are automatic translation.
溶接時
4
From Japan
On 2017-05-22 10:02:38
とってもいいのですが、ヘッドバンドのねじの交換材料またはそれに代わるものはありませんか? ねじが効かなくなるともう使えません。なにか案があったら教えてください
This review is about item#6858415.
welding
5
From Japan
On 2017-03-28 12:32:30
You can use well very condition because it is often welded while supporting it with your other hand material.
This review is about item#6858415.
Coated bar · TIG welding (more than 30A)
4
From Japan
On 2016-12-16 09:54:09
Good points: [light] meets the minimum function as a [cheap] welding surface of the automatic, lightweight simple because is no match even in a high-level machine. The Bad: This is a battery-powered. The explanation is with "Because you are working with the power of sunlight", two only in the light-shielding behavior built-in CR2430 battery in the body are using solar to printed but because the light-shielding determined to be "SolerPower" we are in. Please think basically consumables because it can not replace the batteries. I can recommend it to a hand-held surface user to welding beginners, stick welding. I am whichever little your high surface made of Lincoln Corp. and TPO, but there is also a scene in which this product is over. ※ battery has expired in the four years from the purchase. Button battery board mounted. And yet the foot with CR2430 was not available. It is usually the battery can not be replaced but has been retrofit to the battery case for the CR2430 to decompose. Always becomes a battery replacement, I'm going to use from now also a long time. (Remodeling is at your own risk)
This review is about item#6858415.
Construction machinery, farm equipment repair
5
From Japan
On 2016-11-15 02:49:27
And both hands to be able to use, the timing of the cane light is preeminent.
This review is about item#06858415.
Welding operation
2
From Japan
On 2016-10-20 17:45:56
When you buy last time, was able to use three years position, this time, reaction to the not poor one year has become useless dull. It looks I think still a shame I can use.
This review is about item#6858415.
Welding work in general
4
From Japan
On 2016-07-10 09:39:50
It may be light, but there are no consumables. Protective glass etc.
This review is about item#06858415.
I am using it for maintenance of a motorcycle.
5
From Japan
On 2016-06-23 16:34:54
Although it was used for welding parts, it is very useful because it is inexpensive and inferior to other companies' products in terms of performance.
This review is about item#06858415.
Welding operation
1
From Japan
On 2016-05-31 22:19:32
It was in a state that I could not use it at all, so I got it replaced. It is impossible to understand well with Japanese notation of instruction manual.
This review is about item#06858415.
When welding
2
From Japan
On 2016-05-11 16:50:16
The headband inside broke soon. I wish I had the option for replacement.
Welding operation
2
From Japan
On 2016-04-12 13:36:43
It is welding work about twice a week, each one to three hours. The reaction became dull in two months, it became dizzy and unusable. Although I replaced the transparent cover, it is useless, although it can be used for a few minutes even after reusing it after leaving it on purpose, it is restored soon. I am ready because it is cheap, but I hope you have at least a year without saying two years.
This review is about item#06858415.