Cynlindrical Proximity Sensor, Direct Current 2 Line Type / Pull-Out Cord TypeE2E E2E-X3D1-N 2M
Ship pack of
This product is manufactured in Japanese standards. Please check the specification before you order.
Detection Distance (mm)
Standard Detective Object (mm)
Cord drawer type
Setting Distance (mm)
0 - 2.4
Operating Mode (when approaching objects detected)
Working Voltage Range (V)
DC10 - 30
Red (setting display: Green)
Maximum Ink Ejecting Frequency (kHz)
Power Supply Voltage (V)
DC12 - 24 Ripple(p-p) Below 10%
Brass nickel plated
Insulation Resistance (Mohm)
More than 50 (with DC500V mega) between charging bundle and case
2 X, Y and Z 10 times for each direction Vibration Resistance
10 to 55Hz multiple widths 1.5mm X, Y, and Z 2h for each direction
The positioning of dies. Detects passing of palette. Detects when product is full.
Magnetic metals (detection distance will be reduced for non magnetic metals.)
Surge absorption, short circuit load protection (control output and diagnostic output)
Ambient Humidity (% RH)
During operation and storage: 35-95 (However, no freezing or condensation)
Diagnostic Ability Delay
0.3 - 1s
Leakage Current (mA)
0.8 or less
Material (detection surface)
PBT (poly butylene terephthalate)
Cord Length (m)
DC 2-wire type, polarized
IEC STANDARD IP67
Standard PVC cord (oil resistant)
Less than 10% of detection distance
Switching capacity: 3 - 100mA
Residual voltage: 3V or less (when load current is 100 mA, and cord length is 2m)
Tightening nut: brass, nickel plating
Toothed washer: iron, zinc plating
Ambient Temperature (Degree C)
During operation: -25 to +70, during storage: -40 to +85 (however, no freezing or condensation)
"At +/-15% of rated-supply-voltage within the limits, it is less than +/-1% of detection distance at the time of rated supply voltage."
Effect of Temperature
Within the temperature range of -25 to +70degreeC, it is less than +/-10% of detection distance at the time of 23degreeC
AC1000V 50/60Hz 1min, Between charging bundle and case
Customers Who Viewed This Item Also Viewed
4 Customer Reviews
The reviews are automatic translation.
Check of parts missing parts
On 2017-03-02 09:45:03
There is no problem as a product, but the detection distance is insufficient and I repurchased it to the upper sensor.
On 2016-08-21 10:48:26
There is no problem with the product. It is saved to be shipped the day.
For cargo crane (Unic car) storage forget alarm device.
On 2010-06-09 09:15:19
Manufacturer's genuine product (Tadano) Because it is comparable and the price is cheap (wiring required wiring), it is also best for repair after TADANO TM-ZR machine.
Maintenance inspection and repair of multi-level parking lot
On 2009-08-20 14:49:55
When installing, the length of the screw part becomes longer than before, and it can now be easily set by attaching the main body without severity setting of the attacker side to detect. By the way, I can use it for alternative products with other companies, I think that there is no backlash after installation and reliability is high. On the contrary, when you can keep in touch with existing lengths, it was too long to use in some cases. (It can not be installed unless the wiring side is broken into an L shape)
Customers Who Bought This Item Also Bought