Due to the national holidays as Golden Week, we will close 2017/5/3~2017/5/5. This may cause delays with our responses. Thank you for your understanding.

Buy more than* S$200* and get FREE SHIPPING

  • Solid-State Timer H3Yn-2 And H3Yn-21
  • Solid-State Timer H3Yn-2 And H3Yn-21
  • Solid-State Timer H3Yn-2 And H3Yn-21

Solid-State Timer H3Yn-2 And H3Yn-21 H3YN-2 DC24

5.00 (5)
H3YN-2 DC24
Package Qty.
Ship pack of
51.10 SGD
In stock
Now we ship to...
...see all
Item Feature
This product is manufactured in Japanese standards. Please check the specification before you order.
Terminal Shape
Plug-in (surface mounting) 8-pin
Insulation Resistance (Mohm)
100 or more (measured at DC500V megger)
Weight (g)
About 50
Power Supply Voltage (V)
Ambient Humidity
35 - 85%
Impact Resistance (Malfunction)
100 m/s2 6 directions, 3 times each
Withstand Voltage
AC2000V 50/60Hz 1min Between the terminal conductive parts and exposed non-charging metal parts ( except for the terminal screws ) Between power supply circuit operation and control output Contacts between different poles AC1000V 50/60Hz 1min Between non-continuous contacts
Vibration Resistance
10 to 55Hz, single amplitude 0.75mm, 3 directions, 1h each
Electrostatic Yield Strength
4 kV (malfunction), 8 kV (breakage)
Impulse Voltage(V)
Power supply terminal: 1k Between the metal parts and exposed non-charging terminal conductive part : 1.5k
Operating Time Variation
+/-1% or less (with full-scale time) It is +/-1%+/-10ms or less in a range of 1s
Release Voltage
10% or less of the power supply voltage
Control Output
AC250V 5A resistance load (cosphi=1) minimum applicable load DC5V 1mA (P level, reference value)
Storage Temperature (DegreeC)
-25 to 65 (however, no freezing)
Recovery Time
less than 0.1 s (along the way including the carriage return)
EMC Standard
EMI:EN61812-1 Radiated interference field strength : EN55011 Group1 class A Noise Terminal voltage: EN55011 Group1 class A EMS:EN61812-1 Electrostatic discharge immunity: IEC61000-4-2 8kV air Electric field-strength immunity :IEC61000-4-3
Time Limit Contact
Protection Structure
Allowable Voltage Range
85 to 110% of power supply voltage
External Dimensions (Width (W)x Depth (D)x Height (H)) (mm)
Below 21.5 x 63 x 28 below
Power Consumption
(During DC24 V/ reference value) when the relay is off: About .1W when relay is on: about 1.1w
Impact Resistance
1000 m/s2 6 directions, 3 times each
Vibration Resistance (malfunction)
10 to 55Hz, single amplitude 0.5mm, 3 directions, 10 min each
Time Specification
Short time period type 0.1 s to10 min (1 s, 10 s, 1 min, 10 min 4 range switching)
Voltage Influence
less than +/-2% (during full-scale time)
Mechanical: 10 million times or more ( without load: opening and closing frequency of 1800 times per hour) electrically: 500,000 times or more (AC250V,5A, resistance load, opening and closing frequency of 1800 times per hour) at room temperature
Operating Ambient Temperature (deg C)
-10 to 50 (however, no freezing)
Effect of Temperature
less than +/-2% (during full-scale time)
Noise Immunity
Square-wave noise by noise simulator +/- 1.5kV (pulse width of 100ns/1micros rising 1ns)
Compatible Safety Standards
UL508, CSA C22.2No.14, NK, LR acquired, EN61812-1, IEC60664-1 2.5kV/2
Operating Mode
On delay, interval, flicker-off start, flicker on start - 4 mode switchable by DIP switch
Set Error
less than +/-10%+/-50ms (maximum time scale)
Customer Reviews
5 star 5
4 star 0
3 star 0
2 star 0
1 star 0
Review Rating: 5.00
5 Customer Reviews
The reviews are automatic translation.
Own work
From Japan
On 2016-07-07 17:36:14
It makes heavy use OMRON material from previous. This is also done a high-quality operation, it is welcome.
This review is about item#35227184.
Used food machinery
From Japan
On 2015-10-11 16:05:05
Convenient range exchange can
This review is about item#06862213.
Repair or alteration multi
From Japan
On 2013-05-09 18:47:09
This review is about item#06862213.
Electrical construction
From Japan
On 2012-11-01 16:48:20
And a little more cheap. More of Omron's site was cheap
This review is about item#06862222.
Cutting blow off work at the time of work
From Japan
On 2012-09-28 14:10:45
The ON-delay OFF-delay pulse and the like 4 types of behavior are switching the DIP switch, Dish that you want to standing because the variety available in one because the addition can also be set are four maximum operating time Since 3/4 of cheap off sold in price ● di ● of the timer is a also fixed and time only on-delay It is necessary to chose those necessary functions, it is more of omron is good usability. I used as an off-delay, it and the product is involved in a circular saw to blow the cut work, jump out in front by the rotation of the saw to cut is switched ON at the same time in order to prevent that no longer Turning to the next task It was solved in that blow off at a certain time air.
This review is about item#08589253.