The reviews are automatic translation.
On 2015-12-10 23:48:23
It was good and cheap to buy
Mechanical disassembly maintenance
On 2015-08-25 09:31:51
No problem. This is cheaper than buying at a hardware store for a bit. Anyway, I will definitely get it.
Hitachi's motors overhaul
On 2015-04-21 19:13:29
Nevertheless it was the same manufacturer as the bearing that we had until now. All the seals and packing were weathered, but only the bearings were fine. I hear that the NACHI bearing is good, but it may be exactly right. However, the small variation is defective in the ball.
Maintenance for motor bearings
On 2015-02-04 13:20:44
As expected it is less NACHI 's bearings and less reduction than other ones. I'm thinking of asking again next time.
Range hood VT - 60 motor bearing Removal of replacement motor and soldering of wiring etc. It took quite a while time.
On 2015-01-20 00:13:05
I could use it normally.
Repair of power tool
On 2014-05-27 14:32:53
There is no monotaro brand at all. It is about 1/10 of the life span of domestic production, but this is very good!
Change fan bearings' bearings
On 2013-07-03 17:02:27
There is no problem after replacement, how about displaying it as a guide such as bearing life etc.?
On 2012-08-29 18:23:35
For bowling pin setters
On 2012-07-18 17:11:51
Currently it is used without problems.
On 2011-10-11 18:27:51
Was good. It was inexpensive compared with other makers