Buy more than* S$200* and get FREE SHIPPING

  • Silicone Rubber Sheet

Silicone Rubber Sheet K-125(50)

4.48 (21)
Package Qty.
Ship pack of
159.90 SGD
In stock
Now we ship to...
...see all
Item Feature
Oil Registance
35(150deg Cx70h)
Cutting Time Elongation (%)
Tensile Strength (MPa)
JIS Standard
Silicon hardness 50
Milky white
Width (mm)
Heat Resistant
225deg Cx70h when hardness change (type A durometer): tensile strength change +2 (%): -14 cutting Shin rate of change (%): -16
Compression Set (%)
12 (175deg Cx22h)
Hardness (Durometer A)
Specific Gravity
Rubber sheet
Heat-Resistant Temperature (deg C)
-30 - +150
Thickness (mm)
Length (mm)
Customer Reviews
5 star 12
4 star 7
3 star 2
2 star 0
1 star 0
Review Rating: 4.48
21 Customer Reviews
The reviews are automatic translation.
It used to wiper oil milling table
From Japan
On 2016-12-02 20:13:16
During the changeover, it uses a cutting fluid on the table to take in the wiper sense. It is quite essential. I bought the 6t × 100 × 100. Other sizes are also held, but this size was the best.
This review is about item#7057872.
Other silicon rubber reinforcing
From Japan
On 2016-11-30 09:37:34
It survives because the can be ordered in small amounts. The next day to you arrive is.
This review is about item#7057906.
The spacer of the clamp to be attached to the bicycle
From Japan
On 2016-07-09 08:56:56
Than the minimum diameter of the clamp to attach the accessory to the bike, there is that the frame is fine, but do I have to adjust the thickness is wound around a resin sheet, there in the hardware store only propylene rubber or natural rubber, immediately since deteriorated cracked, If you are looking for variety, we found here and fluorine rubber. More of silicone chose at that would be difficult to compromise the aesthetics translucent. It was very helpful to buy a smaller size.
This review is about item#07057845.
It used to underlay when many things make the handiwork in the glue gun
From Japan
On 2016-07-01 17:31:22
A low-temperature and high-temperature glue gun, depending on the application has been used in high frequency, but sag and leak unexpected is the problem. Not quite take and drip to those poor, also it is the worst useless. By performing the work covered with this sheet, and can be easily recovered after solidified also also leak dripping, since there is no contamination of impurities, in the glue, when such as to fill the large type what was moderately crushed the It will also be savings of glue by putting.
This review is about item#07057976.
Plastic tank cap water stop packing the creation of (for water)
From Japan
On 2016-04-30 17:44:54
A good product, we are satisfied with early arrival to the product. I think that if Negaere a cut in processing size if possible.
This review is about item#07057924.
From Japan
On 2015-07-30 00:33:17
Just a good size, cheap price is enough to use
This review is about item#07057845.
From Japan
On 2015-07-27 21:43:02
It was nice to go.
This review is about item#07057994.
When painting, use for masking purpose where paint should not be applied
From Japan
On 2015-06-02 15:10:15
It is very good. You can choose various thicknesses, you can cut to the size you like. From now on, it is buying.
This review is about item#07057933.
Use as a hobby
From Japan
On 2015-03-04 16:09:52
I was looking for a silicone rubber sheet so it was just affordable size and price.
This review is about item#07057924.
Insulation sheet for electrolytic corrosion prevention
From Japan
On 2014-10-31 15:32:21
I use it around the water in a place where SUS and aluminum come into contact. When adhesion is necessary, the bus coke, which is a filler, sticks stronger than the silicone type adhesive.
This review is about item#07057906.