The reviews are automatic translation.
Skip the ones after the processing in the air
On 2016-01-18 10:27:02
Things it does not matter if you are firm. The future is also purchase plans.
It is a water-soluble oil of the NC.
On 2012-12-21 16:08:12
It is satisfied without any loose not too hard can be connected without difficulty to a very good connection part.
Coolant hose exchange of NC lathe
On 2012-12-21 09:16:55
Because the low price was purchased worried a little, indeed MonotaRO brand! !
It was replaced with genuine products of the machinery manufacturer, but normally can be mounted not be outdone.
Also it hopes to durability.
Vacuum to the use of cutting debris mini CNC milling machine.
On 2012-03-03 06:04:41
After installation, the objective achievement are satisfied.
It is used when processing the non-ferrous alloy in the NC composite lathe.
On 2012-02-17 12:59:57
Until now, and it has been used for a long time because it was made of metal nozzle, the workpiece point of
The cutting fluid is no longer hit, the cutting fluid from the place of the coolant hose
It began to hit without deviation on the tool point.
Preventing deformation of Pradhan reel
On 2011-08-02 18:52:00
Break from the connection portion and the connection and disconnection be a dedicated tool.
Torasuko made is unbreakable
Tools we use to cutting oil for the nozzle of the machine, because the exchange frequency so pretty sore in the facet of the workpiece from the nozzle of SUS is large, it will be saved because of cheap goods unit price.
On 2011-07-11 08:23:02
Cutting oil will be saved because the hit with pinpoint the workpiece.
On 2011-06-29 15:00:27
At the time of installation, it cracked.
But there is also a time that can be mounted well, pretty hard as a whole.
To become a flexible, double socket Ayobi coolant liner to its destination
(Connector -), and from the attached acrylic pre - To be attached
Hooking the corrugated tube.
On 2011-03-06 17:04:59
Since the hook the thing, because gravity takes clock - so good runt hose joints stiff.
On 2011-01-14 14:46:36
Because want to separate coolant to 2 also buy did in conjunction with the Y-shaped fitting of Torasuko, was unable to connect even if doing.
It hose high of Torasuko, please make a Y-joint in the original.