The reviews are automatic translation.
When assembling machine parts after maintenance
On 2018-05-21 15:15:55
Although it is low price, finishing and accuracy are very satisfied well.
For pipe fixing
On 2017-12-24 18:06:15
Since the surface is not a mirror finish, I feel irregularities slightly when I touch it.
There was no Bali.
I pushed the stainless steel bar against the groove and tried to rotate it, but the bar was not scratched.
It may be scratched by resin.
Both holes are empty at the same position, and 10 mm for hand caliber of calipers.
It was a little loose feeling with M10 bolt at Yuruyur where I passed a 9.5φ round bar.
It was a product with no problems for my intended use.
Holding round bars and the like during metal processing
On 2017-12-02 19:33:04
It is used for drilling machine and milling.
Monotaro - sort of goods like this is saved.
Processing of pipe etc.
On 2017-10-23 18:44:20
I felt that the size was reasonable and texture was also very good.
Ease of holding is also good.
Measurement of crank, core
On 2016-11-06 15:34:35
Purchase for crank measurements, core sinks at the same time as replacing the original H type conrod. I have not used it yet, but it looks good.
Measurement of runout of motor shaft
On 2016-03-17 06:18:53
This finish at this price is good, is not it? I also want another big thing.
On 2016-03-09 21:00:21
Orthogram during model making
On 2016-02-09 22:23:40
Is there a little light block?
Crankshaft centering surveying
On 2015-10-23 18:34:53
It is OK if you survey the crankshaft of 1 cylinder class,
Processing and cutting of round bars (including pipes)
On 2014-08-26 15:15:08
I tried various but I would like optional parts to fix the processing material. The material will move during processing. Especially when it is an acrylic rod / pipe. Hitting optional parts for fixation, it seems that processing is necessary a little more than the current one. The round hole of the precision block made of cast iron is opened, but since the hole position is rough, trying to make a self made part, the dimensions of the material fixing for 2 pieces 4 holes are different. Also, as the surface is rough like a file, scratches will be attached to acrylic or POM resin. As scratches are attached, now we are sandwiching rubber plate between cast iron precision block and acrylic or POM resin. (If you use a thick rubber plate, since the blurring becomes big, I bought a rubber plate of 0.1 ~ 0.3 mm at the home center.) Since Monotaro seems to have reasonable size, very thin rubber plate does not have handling ... · We asked for surface polishing, but we did not hear from you without reply. It is rough so that aluminum and brass can be scraped off. It can also be used for nail nails. Surface finish A grade finish is good even if it is high. If it remains current, we will not purchase additional items. I would like you to drill holes in the exact position of 2 holes 4 holes and polish the surface to at least the aluminum plate at the minimum.