Buy more than* S$200* and get FREE SHIPPING

  • Oil Jug
  • Oil Jug
  • Oil Jug
  • Oil Jug
  • Oil Jug

Oil Jug 151

4.04 (122)
Package Qty.
Ship pack of
31.72 SGD
Shipped after 2017-11-27
Now we ship to...
...see all
Item Feature
Since it is of polyethylene material , paint thinner canot be used . For other chemicals, please refer to the resistance data. Product specifications are subject to change. Please make it a note beforehand .
Handle Height C (mm)
Diameter D (mm)
Overall Height (mm)
Capacity (L)
Nozzle Caliber D1 (mm)
With inside stopper
Bottom Diameter A (mm)
Shell Diameter B (mm)
90 (center section)
Scale Interval
Handle Height H1 (mm)
Customer Reviews
5 star 71
4 star 18
3 star 13
2 star 7
1 star 13
Review Rating: 4.04
122 Customer Reviews
The reviews are automatic translation.
Adding Blue to the truck
From Japan
On 2017-10-25 21:56:51
I bought it to avoid dust contamination. I think that this product is a good product to avoid mixing of dust at the time of use and storage.
This review is about item#7293921.
During machine maintenance
From Japan
On 2017-10-18 15:05:13
In addition to having a plug of a mouth, it is very convenient with a lid. The ivy can be easily taken and squeezed and it is very useful.
This review is about item#7293921.
Oil change
From Japan
On 2017-09-11 16:01:15
Just a good size. The nozzle length is also just right.
This review is about item#7293921.
For oil change
From Japan
On 2017-08-24 19:51:38
I think that it is good because it is structured to prevent dust infiltration during storage. Also, the threaded cap at the nozzle tip can be attached to the upper lid when lubricating the car. I feel that the nozzle is a little hard.
This review is about item#7293903.
Oil change
From Japan
On 2017-07-14 08:53:54
The lid of the lid is bad, it is the same as without a lid which is hard to settle
This review is about item#07293937.
To replace grease in automobiles!
From Japan
On 2017-07-05 16:04:01
Since it is possible to cover the lid of the nozzle tip and the mug itself as well, it is convenient to think that being able to prevent dust mixing after use is convenient! The price is also cheap and is fine.
This review is about item#7293921.
When car maintenance
From Japan
On 2017-06-11 17:48:17
I bought it for exchange of coolant liquid. Since it can be sealed with a lid, it is handy for storage.
This review is about item#7293912.
Oil change
From Japan
On 2017-06-08 08:57:57
Purchased for use in gear oil exchange of tiller. I think that it is good that the nozzle also has a long lid so that dust does not enter. The price is also cheap and good, but the gear oil mouth is in the lower person, the tire is also there and it is narrow so I thought that the nozzle was longer than 2 cm ~ 3 cm longer.
This review is about item#07293903.
Car oil change
From Japan
On 2017-05-16 22:00:22
When delivering Since the nozzle was packed by being pressed along the body bottle at the position of 90 degrees just below, a large force is applied to the nozzle peripheral parts and the parts are damaged. When looking at other product review posts, nozzle peripheral parts broken, broken, etc. Is it also caused? Remove the nozzle and fix it with the masking tape inside the main body or remove the nozzle from the opposite side of the plastic screw and install the plastic screw and the nozzle will enter the inside of the main body so you should pack it in that state. Please improve the packaging method. I personally want it because there is no leak tight cap at the tip of the nozzle looking at the product. I think that the nozzle is a little thin for 4L. A little thicker will be saved when oil is introduced. Since I have not used it yet, I will re-post it after using it several times.
This review is about item#7293921.
It is used for repair etc.
From Japan
On 2017-04-24 15:19:45
It was nice to buy it very easy to use. I am very satisfied.
This review is about item#7293894.