The reviews are automatic translation.
On 2014-11-25 02:11:21
Clamp performance, enough so easy presser.
But the pressing part of the tip is there anxiety because the fine-bolt of plastic.
We decided to use the applied rubber was changed to metal bolt.
From the beginning, even better it was metal bolt & Rubber.
Fixing of the material to a router table
On 2014-09-17 00:02:14
Since the processing to material firmly can be fixed you can work safely.
It was a good size for use in the jig.
On 2014-07-30 05:07:42
Are using does not have any problem at all.
Used as a clamp to secure the member to the mold plate
On 2014-07-21 22:16:53
Reasonable size, strong fixing force, does not scratch at with rubber.
On 2014-05-28 17:15:31
It is inexpensive has been but firmly made. Feel of the lever is no particular problem.
When material cut at the table saw, use the material presser
On 2014-03-13 21:19:56
At the table saw, for example, it can use to secure the material if you want to cut at an angle of 120 degrees the wood.
On 2013-12-05 16:21:30
The pin of the rubber in the parts I want to line up at GOOD HAND.
On 2013-02-05 21:05:12
In the case of wood use, to secure the clamp in some way to the bench I secure the workpiece, it is necessary to adjust the processing plate thickness at the base thickness to be attached to the bench. Or if there is any adjustment mechanism to increase the reluctance of the clamp. Rigidity durability of the precursor seems to be enough.
For wood fixed
On 2012-12-06 12:59:47
You can rest assured with the feeling that it is firmly seated.
On 2012-05-30 19:16:32
To use the bottom plate welded to, want a big thing in a little more thick