The reviews are automatic translation.
On 2016-08-04 10:16:59
Extent that I thought is to not shaved, become useless and use once.
Removal of broken 4M tap
On 2016-06-15 19:51:11
To work start after two minutes to set the milling machine, it has broken at from the tip of the 5mm position. You might be well drilling depending on the conditions, but as the foundation unreasonable work in the amateur. orz that it took nearly half a day to recover from this sense of frustration.
Battery-powered electric drill use
On 2016-04-27 14:49:06
It has is certainly scraped, but about 6mm its speed is doing very slow 3 hours.
Drill I have broken from the middle of them.
Perhaps way was bad, but not convinced.
Drilling hard shaft
On 2015-10-29 15:59:54
It is impossible with a drill 3 mm hole drilled in a carbon steel shaft. It was accompanied by trial and error to use by an amateur, and I got missing a tooth near the penetration. . Will it be cured by polishing ?, In the electric hand drill there is a risk of tooth chipping, but it is a point to push it slowly over time.
Elimination of damaged taps
On 2014-10-31 09:03:52
OS6 made M6 tap accidentally folded Can the hole be drilled with the same manufacturer's hard drill? Moreover, the tap is broken in a state of being stuck near 20 mm. Honest talk, I was not expecting ... With the fine feed of milling, I started awesome feeding. With dry cutting, I opened a 20 mm deep through hole in the M6 tap! Moreover, the screw thread was pulled out intact! Just like "Shogun and shield" wins! Great drill! OSG is not Date ♪
Elimination of damaged taps
On 2014-08-24 16:30:36
I ought to have bought this product from the beginning, as many as a waste of the drill's blade wasted.
Removing broken taps
On 2014-05-12 16:32:08
It took quite a while to cut, but I was able to successfully remove taps.
Drilling of superhard board
On 2014-03-24 14:09:04
Sharpness is good. However, if the total length is 50 mm it is the highest. If other manufacturer's items have a total length of 50 mm or more, please introduce.
Breakage tap removal
On 2013-06-27 17:08:45
I broke the tap and got lost as a carbide drill to remove it, but I worked with a drilling machine purchased here at Mochi Rice cake shop, so I removed a core a bit but managed to remove somehow Although it is nice, I think I will use a milling machine at a moment
MonotaRO TIN-I-SFT M6 x 1 Tin coat spiral tap As breakage tap removal
On 2012-05-18 00:43:05
We confirmed the cutting conditions with OSG HP, but we did not know, so temporarily spindle rotation number 1,800 rpm, dry cutting was done. First of all, after breaking the tap part with a diamond rotating grinding stone, making it almost flat, cutting the hard drill to reduce the hard drill and cutting it into a breakable tap part, it can not cut totally. Hardness difference with spiral tap was hardly felt. After all, we abandoned the removal of tears on the way. ⇒ I would be pleased if you can ask the working maker of the milling machine whether there is an error in the method of use.