Buy more than* S$200* and get FREE SHIPPING

  • Hard drill (for breakage tap removal)

Hard drill (for breakage tap removal) EX-H-DRL 11

by OSG
3.40 (10)
Item.#
08117015
Mfr.#
EX-H-DRL 11
Package Qty.
1PC
Ship pack of
1
269.90 SGD
ADD TO CART
Shipped after 2017-05-29
Now we ship to...
...see all
Item Feature
Blade Diameter D (phi mm)
11
Overall Length L (mm)
110
Material
Cemented carbide (CARBIDE)
2014 TRUSCO Published Page
1-0425
Shank Diameter d (phi mm)
12
Pricision
h7
Point Angle (Degree)
118
TRUSCO Part Number
630-4664
Groove Length FL (mm)
55
Compatible
Hand Tap: M22,7 / 8 point Tap: M18 Spiral Tap: M22,7 / 8
Customer Reviews
5 star 4
4 star 2
3 star 1
2 star 0
1 star 3
Review Rating: 3.40
10 Customer Reviews
The reviews are automatic translation.
Tap removal
3
From Japan
On 2016-08-04 10:16:59
Extent that I thought is to not shaved, become useless and use once.
This review is about item#08116963.
Removal of broken 4M tap
1
From Japan
On 2016-06-15 19:51:11
To work start after two minutes to set the milling machine, it has broken at from the tip of the 5mm position. You might be well drilling depending on the conditions, but as the foundation unreasonable work in the amateur. orz that it took nearly half a day to recover from this sense of frustration.
This review is about item#08116927.
Battery-powered electric drill use
1
From Japan
On 2016-04-27 14:49:06
It has is certainly scraped, but about 6mm its speed is doing very slow 3 hours. Drill I have broken from the middle of them. Perhaps way was bad, but not convinced.
This review is about item#08116927.
Drilling in hard shaft
5
From Japan
On 2015-10-29 15:59:54
Used in a 3 mm drilling in carbon steel shaft it was impossible in the drill. The amateur use accompanied by trial and error, had been missing teeth through just before. . Kana heal in polishing ,, In the electric hand drill there is a risk of missing teeth, but impose slowly over time point or with.
This review is about item#08116927.
Removal of damaged tap
5
From Japan
On 2014-10-31 09:03:52
M6 tap made of OSG that broke accidentally Whether it is to be able to make a hole in the hard drill of the same manufacturer? Moreover, the tap is broken while the stuck near 20 mm. Honest story, did not expect ... In fine movement feed milling, gingerly start the feed In dry cutting, it opened the through-hole of depth 20mm to M6 tap! Moreover, it was withdrawn in the thread intact! Exactly "spear and shield" complete victory! Amazing'll this drill! OSG is not a Date ♪
This review is about item#08116945.
Removal of damaged tap
5
From Japan
On 2014-08-24 16:30:36
You should buy this product from the beginning, Nothing this was to waste the blade of the drill.
This review is about item#08116927.
Removing broken taps
5
From Japan
On 2014-05-12 16:32:08
It took quite a while to cut, but I was able to successfully remove taps.
This review is about item#08116927.
Drilling of superhard board
4
From Japan
On 2014-03-24 14:09:04
Sharpness is good. However, if the total length is 50 mm it is the highest. If other manufacturer's items have a total length of 50 mm or more, please introduce.
This review is about item#08116936.
Breakage tap removal
4
From Japan
On 2013-06-27 17:08:45
I broke the tap and got lost as a carbide drill to remove it, but I worked with a drilling machine purchased here at Mochi Rice cake shop, so I removed a core a bit but managed to remove somehow Although it is nice, I think I will use a milling machine at a moment
This review is about item#08116963.
MonotaRO TIN-I-SFT M6 x 1 Tin coat spiral tap As breakage tap removal
1
From Japan
On 2012-05-18 00:43:05
We confirmed the cutting conditions with OSG HP, but we did not know, so temporarily spindle rotation number 1,800 rpm, dry cutting was done. First of all, after breaking the tap part with a diamond rotating grinding stone, making it almost flat, cutting the hard drill to reduce the hard drill and cutting it into a breakable tap part, it can not cut totally. Hardness difference with spiral tap was hardly felt. After all, we abandoned the removal of tears on the way. ⇒ I would be pleased if you can ask the working maker of the milling machine whether there is an error in the method of use.
This review is about item#08116945.