The reviews are automatic translation.
On 2017-03-18 23:06:50
It was used in the brake disk. Also good we are very pleased with the quality.
For the repair of the bike
On 2016-06-27 00:20:05
It was replaced because it was sticking out bolt that came with originally.
It is a neat fit large satisfaction.
Bolts for bike
On 2016-01-28 02:19:22
I bought a total of 12, but the wrinkles at the time of press in the hexagonal hole around which two of the bolt head, there is a nest, quality felt low.
Does not use the low fog that because tightening strength applications that require, but you feel or anxiety not to lick events when loosening of after long-term use.
On 2015-07-11 15:33:55
Where to insert the hex wrench it will be licking distorted immediately. It sounds like a low intensity of the head.
Fixation of the parts
On 2015-06-02 19:29:32
Although we use because the appearance is good for fixing the parts, that would lick the hexagonal hole at the time of tightening is large (wrench use your company's wrench)
It seems that insufficient strength of the bolt head.
It also struggling without loosening slips hexagonal wrench even when you try to Yurumeyo the bolt.
Since the appearance is good, you want to re-examine the strength of the hexagonal hole because it is a bolt of M8.
On 2015-05-05 16:26:03
Screw head from the spot facing of the unit flange had been looking for something that does not jump out. Appearance is also happy and clean. S45C screw in the same applications were also purchased.
Fixed a lot of dust machine parts
On 2014-12-10 19:02:30
In order to contact with the other parts that it is the general cap screw out my head, but I bought the low head M5 size,
M5 to the general cap screw (wrench hole M4), for a wrench hole that it is low-head M3,
If you just had jammed a little fixing or dust in the hexagonal hole, would easily poison.
We want you to come and sell a wrench hole M4 size in the low head M5!
A bicycle bottle cage fixing
On 2014-03-10 13:20:58
TOPEAK (Topiku) to X15 cage adapter used to fix the TOPEAK (Topiku) Modula Cage II.
Cap bolt of 12 ~ 13mm in order to would come out from the back through the M5 × 10mm cap bolts M5 × 15mm bolt to not reach the enclosed was required.
Thanks to Osaka soul-Monotarou rich assortment!
Lid instead of the screw holes that do not use
On 2013-09-20 23:09:07
Since the low-head, it may be less noticeable.
Work fixed at the time of processing
On 2013-04-24 14:59:21
Trouble was usable without.