The reviews are automatic translation.
Polishing of metal parts, peeling paint
On 2015-09-13 09:49:21
Broken in about 10 minutes, the electric wire from a solder poor motor of looking at the wire medium had taken. After because it was vacant for half a year to use purchase did not initial failure application. The problem part was soldered, but this machine is easy to shift the positioning of the fixed-side coil of the AC motor will be offset by one tightening adjustment of the screw. In addition to the metal frame of the contact failure to hold the brush, it to the internal motor there is a heat-radiating fins is not in communication with the outside air for contamination prevention, speed coil component of the regulatory circuit is a distorted appropriate, etc. of the problem Yes you. Motor portion and the base is a strange structure that is fixed with a bolt that was sticking out at an angle. For this reason an unstable operation, is believed to greater individual difference of durability, is the early opening, it is better to commissioning you buy. 7 is easy decomposition and there is a millimeter of the nut driver.
On 2015-09-08 21:16:14
Torque is weak. Stop and the workpiece shed a little strongly.
On 2015-03-17 00:59:49
I think that you can use it so much if you do not expect too much. I am weak in power, so it stops if I hit too hard. Conversely, it can be said that you do not need to cut too much.
Grinding of band saw blade and grinding after polishing
On 2014-10-25 16:31:30
I want the cover of the grinding stone to be easy to remove. The cover becomes an obstacle when grinding the inside where the band saw became a circle after attaching it. I use it to make it easy for me to use.
Use it to scrape handmade tools so that they are easier to use, and to create works.
On 2014-09-18 13:34:44
As soon as you buy it, even if you twist the switch, it will not move and will turn when you try by hand. And I thought that smoke came out and it was broken, moved again and moved. I guess it is such a thing, I will see the state until the warranty period.
A little polishing
On 2014-09-10 17:09:00
I rarely used it so I did this. As it is for hobby, it is not more than that. When turning on the switch, it does not turn around even if you turn the switch to the middle, even with the boom sound or the dial. I will spin quickly suddenly to the highest rank. The dimensions of the mounting holes of the protective plastics do not match. After attaching the parts, the table was made parallel by force. The mounting screws are tightened in the reverse direction with the torque required by the shock driver. Because it is made in China it will be like this.
Polishing of resin / metal parts
On 2014-08-20 00:06:31
Although it may be a phenomenon only of individuals that I bought, in the initial state there is an abnormality in the spring that presses the carbon brush, and due to contact failure occasionally I heard the sound sparking "Titschig". Also, there was a case that it did not rotate unless you turn on the power after moving the grindstone by hand, and it did not rotate at all even if you used it. When I saw the state of the carbon brush by removing the white plain screw of the main body, the trace of the spark was seen in one brush, the spring which pushed the plush was obviously short and it was in a state not under tension. However, when replaced with the attached spare brush, it became possible to use it without problems. I have used it for a while since I replaced my brush now, but for now it does not matter. If you feel that the power is weakly abnormal, you might solve it if you check the brush. I think that it is satisfactory in terms of price because it comes with the flexible shaft and tip tool at this price.
On 2014-08-13 13:48:57
It is quiet, compact and it can be used for multi because it does not get in the way. If you do not expect too much, it will be many times more valuable than the price depending on your ingenuity. Although it was a hobby's mental count, I can not quite take it. It is also ◎ that there is supply of expendables
Used for do-it-yourself and model processing
On 2014-08-12 19:46:44
① First of all, as for Monotaro san, I was surprised because I received the order the next day and I was very satisfied with the goodness of the response. ② Although it is a purchase motive, I already have a Toshiba made grinder and a handruter, but it has a compact, grinding stone for plastic processing and a flexible shaft (2.35 φ · 3.0 φ axis compatible), making it easy to process the model Even if I saw that it could be used for the review, I bought it because the bad impression was not written. ③ Although it is a product, it looks not so good (the label is tilted and stuck, or there is no high-quality feeling made with piss) but there is no worrisome shake of the shaft, quietly with the flexible shaft still attached Rotate to rotation, the torque was small, but it fulfilled the function sufficiently for model processing. ④ Comprehensive evaluation including cost performance is a perfect score of 10 points.
2-cycle engine port processing
On 2014-06-25 06:31:37
Used as a ruther. There was sufficient torque and satisfactory processing was possible.