150% (the average value of the case where the deceleration from AVR control OFF at 60Hz in the motor alone)
Rated Output Current (A)
1.5 (1.4) * Indicates if the carrier frequency (Function code F26) is set to 3kHz or less. 100% continuous operation in the case of the more the carrier frequency 4kHz, please use the current () or below.
Input Power Required Power Supply Capacity (kVA)
0.3 (at the time of DC reactor DCR apply)
Output Voltage (V)
3-phase 200 over 240V (with AVR function)
Tolerable Voltage Fluctuation
+10 The - 15% (phase-to-phase unbalance rate: less than 2%)
Output Rated Frequency (Hz)
IP20 closed form, UL open type
Output Rating Capacity (kVA)
0.57 (in the case of a 220V rated)
Compatible Safety Standards
UL508C, C22.2No.14, EN50178: 1997
Dimension D1 (mm)
3-phase 200 over 240V
This product is manufactured in Japanese standards. Please check the specification before you order.
(Braking start frequency) 0.1 over 60.0Hz (braking time) 0.0 over 30.0s (braking level) 0 over 100%
Output Overloaded Current Rating
150% over the rated output current 1min, 200% over 0.5s
Rated Input Current (A)
(Without DCR) (DCR with) 0.93 1.8 * power supply capacity is 500kVA (if the inverter capacity exceeds 50kVA is, 10 times the inverter capacity) estimated value when it is connected to the% X = 5% of power in
The price is honest via a trading company is cheaper, but the delivery date is shipped as soon as that day! (The trading company is on the 3rd) As the emergency response of the facility stopped suddenly, this delivery date is very appreciated.
Through a trading company etc. It will take several days to deliver, but since it was shipped the day, the repair was over the day after the equipment broke down. The shipment on the day is very appreciated.