The reviews are automatic translation.
On 2016-11-15 14:27:38
Normal class in that it has bought from time to time for hanging hole was on cheap stop shame.
Others socket head cap is high in excess quality, because the only common class is without a hole, and then to be forced to use and additional machining a hole.
Substitution of special tools Remove Mission internal bearings
On 2013-06-17 13:01:23
Since the delivery time of special tools can not wait so much it is said to take one month was processed substitute this spanner. Since the previous section was thin and pretty cut There was also anxiety as "broken kana?" But there was also strength quite while there why even stickiness. It was a cheap tool's Osaka soul was impressed again when the high COSPA.
Tightening of the piping
On 2013-03-17 19:33:01
I think that it is better not to buy people to care about the appearance.
Finish of roughness, bending, etc..
There is no problem to the minute to use.
Personally, I recommend made TOP.
Tighten the nut
On 2013-01-13 20:10:28
Just the right to tighten in a narrow place
Gas regulator attached tool
On 2012-11-15 22:31:04
It was then included as a service tool of this time their products, but the cost performance I think is excellent. There is at the opening processing of slightly bitter, but because trouble is rattled, I think whether apposite familiar at first so much.
Used to tighten the machine lock nut
On 2012-06-25 13:12:38
Also unchanged otherwise feeling and expensive tool. A little bad it looks, but there is no problem at all to use.
Removing a bit of a core drill
On 2012-05-27 22:22:15
Cheap but was good.
Screw tightening of the hydraulic hoses
On 2011-10-16 13:01:05
First appearance. Finish is rough, the aura of "bastards" has come out buibui. ^^;.. "Is the aura that in Japan, on the other hand, even up to this point drop the much cost" Southeast Asia made a wonder ... I think the difficulty or issue a weak mono feeling of "I bought a 30 and 36 if but, since the frequency of use is small, can be cheap chose this. appearance is bad, but only the accuracy of the part that sandwich the screw is a pretty good feeling. I think that endure to fully use. What would? thoroughly seek the cheap but is good even with this, you can buy that anymore \ 100 to \ 200 put out if "made TOP" in each size. "TOP" is also is not a first-class brand, so once a brand has put a decent product, quality up to here It would not be bad. Cho Tchuu size if pricewise it certainly is more of "TOP brand" up a notch attachment to use? I think that bord. I think anyway good in Colle you were cheap. This time is, For better or worse, "Osaka soul! "The was confronted. ^^ ;; Another \ 100 to \ 200 if this quality is I want you to cheaply. (T_T)