10 to 55Hz double amplitude 1.5mm x, Y, Z each direction 2h
Ambient Temperature (Degree C)
-25 To 55, -30 to 70 save time when using (icing, with no condensation)
Red (incident display)
(18000 times / hour switching frequency) (1800 times / hour switching frequency), mechanical 50 million times or more relay output / electrical 100 000 times or more
DC12 to 240V +/- 10% Ripple (pp) 10% or less, AC24 to 240V +/- 10%
(Output format) relay output, (load current) 0 to 3A
"EN60947-5-2 Yes, EMI::  CE EMC Directive display EN60947-5-2, radiated interference field strength: EN55011 Group 1 class A, EMS: EN60947-5-2, Electrostatic Discharge Immunity: IEC61000-4-2, electromagnetic field immunity: IEC61000-4-3, burst noise i
Approximately 25 degrees, Detect hanger bar (φ 9 mm) of product moving with trolley conveyor in high humidity (condensation) atmosphere
On 2013-05-28 16:29:49
Water mist in the painting line There is a relatively bad condition, water droplets adhere to the reflector Stable detection of the hanger bar. (Open slit according to bar stiffness on reflector) Space between sensor and reflector: 1.5 m Light projected on reflector is visible and easy to align optical axis. Supply voltage is AC 24V ~ 240V, suitable for most control circuits. Dry contact output is also appreciated.
Wiring is also easy, it is good not to choose the type of power supply. To MonotaRo. There is also handling of E3JK-R2M1 with the same type, but I did not understand the difference. It was easy to select when you show the difference between ON at the time of incoming light and ON at the time of light blocking on the selection list of the list.