[EMC Directive] CE display: available, EMI: EN60947-5-2, radiated interference field strength: EN55011 Group 1 class A, EMS: EN60947-5-2, electrostatic discharge immunity: IEC61000-4-2, electric field strength immunity: IEC61000-4-3, burst noise immunity: IEC61000-4-4,
500m/s 2 X, Y, Z, all directions 3 times
10 To 55 Hz double amplitutde 12 1.5mm X,Y, and Z (all directions)
Ambient Temperature (Degree C)
During operation: -25 to +55, during storage: -30 to +70 (however, no freezing or condensation)
Red light emitting diode
Standard Detective Object (mm)
Opaque body is phi 75 or more
About 250 (packed state)
Code drawer type
Cord Length (m)
30 ms or less
Ambient Humidity (% RH)
During usage: 45-85, during storage: 35 to 95 (However, no condensation)
AC1500V 50/60Hz 1min ( Between the charged parts and the case )
Insulation Resistance (Mohm)
More than 20 (with DC500V meggers) between charging batch and case
Angle of Beam Spread (degree)
Body 1-5, reflective plate 40 or more
This product is manufactured in Japanese standards. Please check the specification before you order.
Approximately 25 degrees, Detect hanger bar (φ 9 mm) of product moving with trolley conveyor in high humidity (condensation) atmosphere
On 2013-05-28 16:29:49
Water mist in the painting line There is a relatively bad condition, water droplets adhere to the reflector Stable detection of the hanger bar. (Open slit according to bar stiffness on reflector) Space between sensor and reflector: 1.5 m Light projected on reflector is visible and easy to align optical axis. Supply voltage is AC 24V ~ 240V, suitable for most control circuits. Dry contact output is also appreciated.
Wiring is also easy, it is good not to choose the type of power supply. To MonotaRo. There is also handling of E3JK-R2M1 with the same type, but I did not understand the difference. It was easy to select when you show the difference between ON at the time of incoming light and ON at the time of light blocking on the selection list of the list.