10 To 55 Hz double amplitutde 12 1.5mm X,Y, and Z (all directions)
Ambient Temperature (Degree C)
During operation: -25 to +55, during storage: -30 to +70 (however, no freezing or condensation)
Red (with light display)
Output relay/electrical more than 100000 times (switching frequency 1800 times / hour), mechanical more than 50 million times (switching frequency 18000 times / hour)
During shading ON
DC12 to 240V+/-10% ripple (p-p) Below 10% , AC24?240V+/-10%
(OUTPUT FORMAT) RELAY OUTPUT (LOAD CURRENT) 0-3A
[EMC Directive] CE display: available, EMI: EN60947-5-2, radiated interference field strength: EN55011 Group 1 class A, EMS: EN60947-5-2, electrostatic discharge immunity: IEC61000-4-2, electric field strength immunity: IEC61000-4-3, burst noise immunity: IEC61000-4-4,
Approximately 25 degrees, Detect hanger bar (φ 9 mm) of product moving with trolley conveyor in high humidity (condensation) atmosphere
On 2013-05-28 16:29:49
Water mist in the painting line There is a relatively bad condition, water droplets adhere to the reflector Stable detection of the hanger bar. (Open slit according to bar stiffness on reflector) Space between sensor and reflector: 1.5 m Light projected on reflector is visible and easy to align optical axis. Supply voltage is AC 24V ~ 240V, suitable for most control circuits. Dry contact output is also appreciated.
Wiring is also easy, it is good not to choose the type of power supply. To MonotaRo. There is also handling of E3JK-R2M1 with the same type, but I did not understand the difference. It was easy to select when you show the difference between ON at the time of incoming light and ON at the time of light blocking on the selection list of the list.