Buy more than* S$200* and get FREE SHIPPING
Due to the national holidays as Golden Week, we will close 2018/4/28~2018/4/30 and 2018/5/3~2018/5/6.
This may cause delays with our responses. Thank you for your understanding.
This product is manufactured in Japanese standards. Please check the specification before you order.
Impact Resistance (Malfunction)
3 times for each 196m / s 2 SUP> 3 axis in each direction
External reset, manual reset
35 to 85%
Insulation Resistance (Mohm)
More than 100 (at DC500V mega)
Power Failure Memory
(More than 200,000 times the number of times of rewriting) Backups With EEP-ROM
Maximum Counting Speed
(Switching by DIP switch) 30Hz, 5kHz
7-segment negative type LCD (red backlit)
Waterproof packing, adapter for mounting embedded
Outer Dimensions (Width W x Height H x Depth D) (mm)
72x36x66 (neck length)
-99999 to 999999
Time: +/- 100ppm (-10 to + 55 ℃)
0.6W or less
Vibration Resistance (malfunction)
Each 4-cycle three-way 10 to 55Hz single amplitude 0.5mm (8 min / cycle)
Non-charging metal part between the exposed and 1kV conductive part terminal:: 1.5kV between power supply terminals
Each 4-cycle three-way 10 to 55Hz single amplitude 0.75mm (8 min / cycle)
(Switching by DIP switch) total counter / time counter shared
Count, start, gate, reset No-voltage input (NPN transistor input) short circuit (ON state) impedance 1kohm or less, short-circuit (ON state) residual voltage DC2V below, open (OFF state) impedance 100kohm or more voltage input (PNP transistor input)
Used as an indicator to count product passing through the production line
On 2014-12-10 15:53:52
Previously I used a counter for liquid crystal display, but I chose this item because the number is small and it is difficult to see the color. Although I was concerned about the price somewhat because it is made by Omron, the characters are bigger than the previous ones, so it's easier to see. When attaching to the panel the plastic part of the frame bent (cracked and cracked).