The reviews are automatic translation.
Make a hole on the corner pipe of 2.3t.
On 2017-03-04 10:53:18
I purchased for 48 holes in mild steel 2.3t material, the temperature had dipped the oil so that it does not rise, where the 30 drilled, super steel is no longer possible drilling off. I think that life is too short. It does not break even in about opened dozens hole made in China.
Stainless steel 6 places processing
On 2016-08-10 20:25:17
It could easily processed in charge of 10.8
Drilled holes in the stainless steel plate
On 2016-01-28 17:39:38
The price has purchased I think that long-lasting because it is enhanced, a stainless steel plate (3mm thick)
Four open When the tooth to have flew. Although you might arm is wrong!
Although we continued to work to buy other manufacturers goods immediately, there was opened eight, but it was okay.
Drilling of the aluminum panel
On 2015-11-27 17:01:22
But is not yet using it, we use a similar size. There is no particular trouble, but it is a price is high for the problem. At first we used the punch press, but I have bent aluminum panel past the end. Again, Holsoe was re-recognized as a thing necessary.
Metal used to make a hole under the tap to the (aluminum plate)
On 2015-03-23 22:06:16
Electric drill driver with an aluminum plate has a repeat drilling in (3mm thick), but smoothly, I am satisfied me clean open. I think that it is reasonably durability because it does not have happened, such as the moment blade missing.
Drilling of the mirror
On 2014-12-17 17:08:34
I bought without problems also this time because it was using previously.
Drilling of switchboard
On 2014-01-28 23:37:49
It is the same as the home center and it is inexpensive
Drilling of resin products
On 2013-04-09 14:52:00
The blade of the cutter is solid and it looks very good after processing. Since there are various sizes in future, I will use it.
Ss Steel drilling
On 2013-02-04 15:49:14
Because it processed with the keyless chuck, the load was applied and the chuck became useless.
Drilling work of steel sheet
On 2012-10-04 17:31:44
Due to the large hole diameter, there is some shake, but it is cut. I also want to check how much use frequency can be kept.