The reviews are automatic translation.
Cutting of aluminum, brass
On 2016-03-21 13:32:07
But only not using 5, 6 times, sharpness is now very bad.
Person of carbide rotary bar-titanium coating of Toyo Associates (Mr. Meister) will have long-lasting off well.
Also by processing the iron does not change the sharpness.
I do not know what was a minor change from the time, but it will be said that before the higher the sharpness is poor only in aluminum and brass was a degradation product.
Orient Associates of (Mr. Meister) is a cheaper minute cost you about double the amount to long-lasting.
What do if such is made of quality MonotaRO after minor change? ?
Because reviews is is not only wrote and still simply "easy to use" there is only 1, I do not think I want to buy.
As far as the MonotaRO carbide rotary bar cutting conditions, mini router hand router that can be used even in the machining of general steel is not first.
It is 7-80,000 yen or more of the hand grinder (pen type) with barely 50,000 rotation (50,000rpm).
Shank diameter It is the best 20,000 rotation of Purokuson is Φ3.0mm So, carbide rotary bar of the cylindrical type is to be referred to as useless.
Also, see if carbide rotary bar of blade diameter 12.7mm is well, can not be used in a typical mini router hand router.
Carbide Rotary bar of other manufacturers, because it says the recommended number of revolutions in the item description, you can know in advance whether you are corresponds to the router you have.
But, at the time of sale of this MonotaRO product, because it Nante thing was not "MonotaRO carbide rotary bar cutting conditions", there was no choice but to judgment in the evaluation of the review.
Carbide Rotary bar of MonotaRO should also be titanium coating.
Expansion of aluminum, iron, stainless steel, or the like existing hole
On 2016-01-13 16:33:42
Amount of money is cheap, you think that is very good because not too bad the quality of goods.
Used for deburring.
On 2015-10-24 17:48:27
Better or bad, none. Reasonable from the viewpoint of price.
On 2015-07-28 20:47:21
We mainly cut aluminum. Clogging can not be helped, but there is no problem if you try while cleaning. Because cost performance is good, I think that I will buy it in the future.
Molding / scraping milling table use
On 2015-07-08 08:33:59
Although it has passed a long time since purchase, there is no problem if it is aluminum or brass, but it was easier for other companies to shave off if I tried to scrap iron for the first time. The amount that can be scraped by one time is also a little bit, and the processing time will take many times. It seems that it still did not match to a certain manufacturer's item. Since the blade is not attached at the tip, the part that can not be cut vertically is the thing that I want to be cut at a stroke at the same time with the blade with the side scraping, but it did not cut off properly. Long neck · end mill for iron and stainless steel has shorter machining time. Iron scrapers float like dust when using other company's carbide rotary bars, but it is a feeling that scrapers scatter when they are carbide rotary bars of monotaro. I guess, I feel that the angle of the blade is bad. It is like feeling the workpiece gouged. If it is made by another company it is pretty like a mirror finish after scraping, but after using the monotarrow it is a streak of foliage. The conditions for comparing and contrasting are all the same. It is about a difference in length as compared with other companies' products, and others seems not to change very much, but it can not be used. It can only divide it for rough cutting of aluminum and brass. I'd like to give it a titanium coating. With price unchanged · · ·.
Bolt hole correction of stainless steel plate
On 2015-06-18 09:08:13
For correcting bolt holes due to distortion of the aircraft, a rotary bar was used. I used to fix it with a drilling machine before, but it was a bit of distortion so the drill escaped and it was difficult to correct, but it was made easy with this rotary bar. For the moment I used it as a test, but it does not seem to be problematic. Durability is judged from the future result.
Used to remove concrete deposits on hardware
On 2015-06-02 15:37:51
Because hardware is an aluminum product, this product was chosen as a result of searching what is made of an alloy using teeth ultra-hard because the main body is scratched in products such as sandpaper.
Cutting of steel materials
On 2014-06-06 16:45:20
Since it is a double cut, it certainly can be scraped into powder, but in some cases it may be scraped like a needle and I felt somewhat careful to touch with bare hands after cutting. I am satisfied with cutting performance.
Use it where the file does not enter
On 2014-05-28 19:50:58
I used this super steel rotary bar from before. I could not use it because I broke it. Until now I ordered to a tool shop, but I tried ordering to a monotaro this time. I have not used much yet, but I think that it is not different from the previous ones.
On 2013-04-02 00:48:31
It is an excellent item http://www.youtube.com/watch?v=F2zv1JuQq7A