The reviews are automatic translation.
I'm using at the time of hand work, such as stained glass.
On 2016-05-26 16:58:54
Illuminance is there enough, magnifying glass in the fine work is very convenient. I have been fully satisfied with the work.
On 2014-11-23 14:18:51
The other day, purchase of new broken switch!
We continue to use about eight years in the second one, but COSPA is also not good problem.
Products in the factory during the inspection of the (metal pipe)
On 2014-11-21 13:42:37
Magnifying glass and the fluorescent lamp is very easy to find a small crack attached.
And easy to use even that can be adjusted in an easy-to-use angle has become the arm is well received from the field.
Magnified observation and the illumination of the lathe milling machine work
On 2014-02-12 22:09:17
I am happy that's a little more low-cost
Repair work or the like of precision printed circuit board
On 2013-10-10 12:02:11
Ease of use is good. Precision glass lens is also no problem. There is sufficient illumination. Or if there is a LED type of the same degree illumination.
On 2013-02-13 14:34:18
It looks very well.
If I could use a general-purpose HF fluorescent light bulb is even better
Confirmation work of state
On 2012-01-20 05:29:09
It can not be the tightening of the movable portion, resulting in a bow. Level of decomposition, be improved, use can be.
Check of reduced printing drawings and, used to reading
On 2009-06-16 15:11:53
Per center portion of the lens to worry there is a small distortion of the ring-shaped. Because the low price will What is this degree of lens. Still in the body has advanced presbyopia, it is just good to read a book of small characters. The Notes person who stay considering the use in precision work.
On 2009-05-03 20:37:00
Instead of in half of woodworking and engraving specialty catalogs are satisfied. The magnitude of the brightness also loupe also is no problem. There are times when the spring in moving the machine with a vibration comes out the sound resonates I can not be helped I ...
On 2008-11-14 13:28:43
Subtle force adjustment of the locking knob. It does not stop with the loose even a little, can not be even a little tight and fine-tuning. The movable portion is in contact with a metal to each other, but I think that some adjustments are possible even in a state in which the yelling strangle if ask also bitten in the resin of the washer. Range to devise their own considering the price?