The reviews are automatic translation.
Overhaul of Vespa 50S
On 2017-10-05 14:35:34
This is the Vespa 50S drive shaft shift side bearing. It is cheaper than buying genuine and can be relieved with NTN made more than anything.
Used for bike maintenance link
On 2017-07-14 14:10:01
Because it is a standard one I made it to a monotaro that I can buy cheaper than genuine parts. Since it is a standard one, I use it without any problem.
Used to make a shaft receiver in narrow space
On 2017-07-10 18:34:37
It is necessary to turn the shaft in a narrow box
For regular bearings, the receiving hole also becomes larger and the price becomes higher
This type of bearings was cheaper and the movement was smoother than I thought
I am very satisfied.
For changing bearings of milling machine speed change pulley
On 2017-05-31 17:42:47
It was 4/100 mm larger than the outer diameter of 12 mm, making press fitting difficult. Grease is also injected, except for what seems good at about 2/100 mm tight, and it is working well after replacement.
For bottom link of motorcycle suspension
On 2017-05-04 01:17:08
Since genuine bearings were delicate as you saw, take dimensions and exchange for this. I attached it without problems. For the moment I am working fine.
On 2016-11-10 19:27:47
Our company's regular items. I have used it with confidence without any problems. I am saved because it is available cheaply.
Inside the engine
On 2016-10-21 21:45:26
As expected. It is certain that there is only adoption by manufacturers
Ts 250 Bearing of swing arm
On 2016-10-15 20:49:35
I bought it for bearing of the swing arm of ts 250. Unfortunately, the outer diameter was smaller by one time and the size was not matched.
For speed pedals
On 2016-09-29 20:05:06
I used it for exchanging bearings on the pedal of the road bike. It is more reliable performance than genuine.
On 2016-08-02 23:50:05
Bearing relationship is very useful because it is cheap at all because it is cheaper than buying it as a supply part from the manufacturer