The reviews are automatic translation.
By modeling machine
On 2015-07-24 23:39:15
Since cutting the tree have been used in the dry, but high for is not available because very much like the cutting edge in the heat would have been done, we are very handy.
Cutting of aluminum
On 2013-04-26 15:36:25
Cutting of aluminum was also completely OK. Finish also mochi is also good, very satisfied at this price!
Printed circuit board production
On 2013-03-31 16:03:22
Because the length of the blade is more than the thickness of the substrate, pretty good. In the past, I bought a short thing, there is that there was stiffness.
Since the long part of the blade, as well as pattern cut of the board only, also in drilling of large and small, also, can also be used for cutting of the substrate.
In the fabrication of printed circuit board, without the blade of the exchange, since a series of work is complete, very good.
Thin blade want if possible, but painful not buy expensive.
On 2012-12-25 11:31:11
Since the price is cheap, it processed 1000 pieces, but it was able to use it casually
3D cut of relief
On 2012-09-27 19:41:05
There was nothing to be particularly problematic such as sharpness. The price is cheap and easy to use.
On 2012-09-04 16:27:47
The sharpness is good when new. Life is slightly short, but there is no problem from the price.
Concave cutting of brass material.
On 2012-03-18 20:14:42
Since the opponent was brass material, it was able to shave it gently. Due to the relatively minor processing, the dimensional accuracy was also good and it was enough for performance. We were able to respond quickly and promptly to delivery. I was satisfied with the price as well.
To NC machine tool
On 2012-03-15 11:17:06
Although it is inexpensive, it is a wonderful sharpness
Cutting of machining
On 2011-10-29 11:51:31
Since A7075P is the target material this time, it was not a problem at all. Currently, we are in trouble with selection of cutting material such as Heavy Alloy, tungsten, carbide drill, end mill, tap, reamer etc, and cutting conditions. Although there is no problem at all in the processing of ordinary materials (monotaro), such processing costs are cheap, and at the present, it is a competition of work with price cuts. Our company is working on things difficult to process in other companies, but tool cost is high and we are in difficulties in choosing. So, if there is something (advice) with experts on processing, can the customer side also help and can not contribute to sale? Yatsunami
Aluminum and SUS and resin etc.
On 2011-10-12 16:30:31
Because there was no choice when shank diameter became 3 mm, it was kore. The use impression will be good product in terms of cost performance.