The reviews are automatic translation.
On 2016-05-13 18:20:30
It's neither good nor bad.
On 2016-04-02 15:11:43
Expansion and contraction is good
On 2015-12-14 02:28:16
Cars and machinery maintenance
On 2015-10-20 19:01:01
And the neck from bending, even in a narrow place can change the length of the handle, will continue work to quickly adjusted.
Since the very useful, I bought three.
If the socket is, if there is a dent in the inserting inside, it does not come off and can be locked.
Only socket wrench set of handle of about 3,000 yen, I use instead of spears to this.
Since changing the torque also changes the length, I'm glad to be working comfortably, even where difficult to enter the force.
It became one care, and are using the adhesion of the rubber grip is loosening, deviate because, no longer work stopped with a strong two-component adhesive.
Since good condition, it is recommended.
Mounting and removal of the car of the Tower Bar
On 2014-10-28 01:45:25
Easier to remove because the elongation force is applied. Angle is varied but good.
Where clearance is narrow
On 2014-10-19 13:17:01
Purchase is impressions using off the first seal.
Be careful neck does not bend just in the dizzy state
Gently not Yara added to the force and the neck is not turning made me calyx.
Although I bought and everyone Write a review of reference Are of this is really just a good firmness?
It will tilted her neck Innovation.
I did not think that it is good goods sold as a tool to say clearly.
Like car maintenance
On 2014-05-19 10:10:48
I think that the length of the handle is a good product for a good price as it is possible to do with one touch to the length you like
Maintenance of the car.
On 2013-12-24 16:04:10
Designing is good, making is also solid, easy to use. Another problem is the insertion angle. Although it was used for maintenance of the car, it is not enough for 9.5 mm to tighten the nut bolts of 14 mm and 17 mm of the engine main body. Again it seems necessary 12 mm. But it is the best for tightening bolts less than that, but tools may be necessary depending on their use as well. After that I only have to buy the 12 mm type of the same brand, I am satisfied with this product.
Machine, vehicle maintenance
On 2013-12-04 16:45:46
The clearance of the stretchable part of the handle is too large, unless there is this play, it is the best. There is no problem with the specification, it is firm, but it will be a little uneasy if it becomes long-term use.
In a place hard to get in
On 2013-10-23 13:17:35
I use it for oil filter replacement. The neck is not a hula fla but a lattice type? It is easy to use because it is reasonably fixed.