The reviews are automatic translation.
Cut of the bike of the cam chain
On 2017-01-18 16:05:14
Since the set position of the pin extraction is not misalignment can reliably cut the cam chain.
Z1Z2, recommended to the chain cut of CB400Four. I think that the caulking can also be processed a spare pin extraction.
At the time of maintenance of the machine
On 2016-11-16 15:33:22
During the replacement work without any problem, it is a big success.
We have an immediate correspondence We thank.
Used as a repair tool of the machine
On 2016-10-20 03:44:43
It was combined manufacturer of thien manufacturer and the tool that you have purchased.
When the chain is replaced
On 2016-09-29 21:53:58
Cheap and it will be saved because the correspondence is early.
Intermittent of Chen
On 2016-03-16 15:11:11
Insertion of the pins can be easily
We used in the regulation of the chain.
On 2015-08-25 18:17:41
Was very good because we were able to shorten the chain smoothly just put a safe and easy to lightly force. Video also can be helpful, but we used the first time it was incredibly easy.
Price is also Iukotonashi cheap than home improvement.
Because of the chain cut
On 2015-06-02 20:02:24
It was purchased in order to cut. Super easy to force also has expired soon not need.
However, the size that can be cut in a different products in multiple, there was a set thing that can also punch. Who here is, I think got a cheap usability is the price? I thought. By the way, it was sold at 3000 yen or less.
# Of # 60 chain length adjustment
On 2014-11-07 17:23:40
Second unit of a purchase. First unit, but had been used for about two years, craftsmen unfamiliar other day is because you did not set properly on the link when you use, the handle portion is I have bent body was turning force is hard. So it can be cut while hooked a chain to the gear if familiar with how to use, I think that it is convenient. Since the improvements are likely to better a little more thick handlebar enters force, it is where I want to improve.
40 cut of the type of chain
On 2014-04-06 14:07:53
Although I was cut by cutting the link in the grinder until now, I bought a special tool because there is a thing that would also cut part to leave there is a risk that is affected the quality. We also examined other inexpensive, but chose manufactured by domestic manufacturers consider the durability and quality, etc.. It has painted the machine oil to the threaded portion at the time of use. Since the frequency of use is low, it is useful when there is a thing that can be shared with the 35 and 50 type.
Cutting of the shutter for the chain
On 2014-02-14 03:28:45
Despite the use the tip of the other day still several times reblogged Setsuson. We wish to consider a little more strength because there are a lot of use in a narrow place the shutter construction (in the ceiling)