Hinge piece (A) and (B) SUS304/barrel-polishing (shaft) SUS303/-(main part and spacer) SUS301/-(plug) POM / black (countersunk rivet) SUS/-(caulking washer) SUS304/-(thrust washer) POM / primary colors
Dimension F (mm)
Dimensions A (mm)
Dimension H (mm)
Dimensions L (mm)
Operating Temperature Range (deg C)
-10 - 50
Dimensions C (mm)
Initial Torque Value (Room Temperature) N/m (kgf/cm)
Dimensions D (mm)
Please use 1-2 pcs for one item of lid.
Please attach the product with the shaft in a horizontal state.
Set the panel mounting in a way so that the P Q dimensional part of the hinge flees
Please do not use in a place where continuous operatio
Bathroom vanity top mirror mounting BOX, features of a folding counter on which the top board extends
On 2014-07-06 08:20:55
At first, I was worried about whether it could be used firmly, but when load was applied, it moved smoothly and it gets in any position, so I found a very good hardware and I was impressed with the carpenter.
It is used as angle adjustment of small speaker stand and wall mounting · ceiling mounting metal fittings.
On 2013-11-12 15:20:39
It is very convenient for angle adjustment of small speakers. This free stop hinge is a perfect product to use for our small speaker, it is compact and light, making it simple design possible. The strength of the hinge is neither hard nor soft when used for small products. Since we use it for angle adjustment, it is troubled if the adjusted speaker just moves by touching the music vibration or chot, and it is hard when you try to adjust the angle, so it will be troublesome to break the walls and ceiling so hard I use it conveniently. Although it may be impossible, I tried low temperature baking painting once I tried painting it once I made it possible to make a freeze top hinge that can be baked, once it was damaged.
There was a request to wear a sliding door that can be opened and closed on the ceiling, I bought two pieces. It seems that the sliding door was heavy and I could not open it if I could not open it at around 85 degrees. I think I will order two more in addition.
I am satisfied. The hinge is harder than I thought, in the series I bought the one with the smallest size, and if there is no leverage, I need considerable strength. If the attached side is a weak material, it may crack when a force to cause a hinge is added. This time I used it as a part of acrylic work · · box lid ·. At first I was planning to stop two, but because it was too powerful I changed it to 1 sheet.