GOOD ((except for high-octane), aqueous ammonia, A heavy oil, ethanol, ethylene glycol, caustic source oder petrol phosphorus) OK (hydrochloric acid, sulfuric acid (20% at room temperature), BC heavy oil) x (toluene, acetone MEK)
Repairing leakage from connecting portion of tees, elbow, socket of copper tube, and leakage from straight tube itself .
You can repair the leakage of the pin hole of the straight pipe, but please use the exclusive straight pipes models as much as possible. Certain repair is possible.
Dimension l (mm)
Compatible Flaw Length
Allen wrench 10mm
(Cover) / ductile cast iron (FCD450)
Heat-Resistant Temperature (deg C)
-30 to 80
Special heat-resistant agent in the high nitrile rubber
Butt connection of pipes ,connection of joints not possible
[Joint Leak Repair]1/Remove rust and dust from repair part. Remove hard and big rust with saw etc. Make gap right angle. Wipe carefully with waste cloth.2/Attach on gap of pipe and joint without tiny gap.3/Insert attach bolt in crimping socket screw hole.