Special heat-resistant agent in the high nitrile rubber
Butt connection of pipes ,connection of joints are not possible
1/Use a wire brush to clean off the rust and dirt from the repair area. Push until the impact socket’s curved part’s deepest portion (middle part) hits the leakage area. So as not to tighten the four mounting screws polarized as above, tighten it with equ
Chromium-molybdenum steel (SCM435)
Heat-Resistant Temperature (deg C)
-30 to 80
TRUSCO Part Number
Allen wrench 10mm
Dimention D2 (phi mm)
Dimensions L (mm)
GOOD ((except for high-octane), aqueous ammonia, A heavy oil, ethanol, ethylene glycol, caustic source oder petrol phosphorus) OK (hydrochloric acid, sulfuric acid (20% at room temperature), BC heavy oil) x (toluene, acetone MEK)
Repair of pinholes of copper pipe straight pipe. Repair of corrosion point of leakage.
Repair of leakage of hot water piping under the floor
On 2014-07-05 19:02:29
Previously, copper piping, fittings, etc. were brazed to repair hot water leaks, but it was hard work because it was working in the restricted environment under the floor. Crimp sockets are not cheap in terms of price, but I think that it is a suitable part for repair on Sunday carpenters (limited time constraints etc). We prepare 2 for preparing for future leakage.