Crimp Socket Copper Tube Straight Pipe CPL CPL 65A
- CPL 65A
- Package Qty.
- Ship pack of
- Material (metal)
- (Cover) / ductile cast iron (FCD450)
- Pressure Resistance (MPa [kgf/cm2])
- Dimention D1 (phimm)
- Compatible Flaw Length
- About 50mm
- Dimension W (mm)
- Butt connection of pipes ,connection of joints are not possible
- 1/Use a wire brush to clean off the rust and dirt from the repair area. Push until the impact socket’s curved part’s deepest portion (middle part) hits the leakage area. So as not to tighten the four mounting screws polarized as above, tighten it with equ
- Chemical Resistance
- GOOD ((except for high-octane), aqueous ammonia, A heavy oil, ethanol, ethylene glycol, caustic source oder petrol phosphorus) OK (hydrochloric acid, sulfuric acid (20% at room temperature), BC heavy oil)
x (toluene, acetone MEK)
- Material (bolt)
- Chromium-molybdenum steel (SCM435)
- Heat-Resistant Temperature (deg C)
- -30 to 80
- Dimensions L (mm)
- Compatible Wrench
- Allen wrench 10mm
- Dimention D2 (phi mm)
- Repair of pinholes of copper pipe straight pipe. Repair of corrosion point of leakage.
- Material (packing)
- Special heat-resistant agent in the high nitrile rubber
Customers Who Viewed This Item Also Viewed
| 5 star
| 4 star
| 3 star
| 2 star
| 1 star
2 Customer Reviews
The reviews are automatic translation.
On 2016-06-17 13:26:36
A mediocre products, no special assessment
Repair of water leakage under the floor of the hot water piping
On 2014-07-05 19:02:29
Previously, copper piping in hot water of water leakage repair, had been brazed joints, etc., because it was working with underfloor constrained environment, we had a hard time.
Crimp socket is not cheap in monetary value, but I think that it is part suitable for do-it-yourself basis repair (there is a limit to the time constraints, etc.).
In preparation for the future of water leakage, and Yes to prepare two.
Customers Who Bought This Item Also Bought