Customer Reviews of Collar Nut, Iron/Uni- Chrome
The reviews are automatic translation.
Showing 1 - 20 of 77 Reviews
Maintenance of motorcycles
On 2018-04-25 15:07:16
I want something with no jaggedness (cerate) at the bottom. Strictly speaking, the one without cerate is easier to manage the tightening torque, and it is also hard to loosen. If the other party is a soft wood or the like, cerate is advantageous, but if you use a washer you should use something obvious.
For trailer assembly
On 2018-02-18 12:03:45
It is always a purchaser and a repeater. There is no particular doubt
Control panel, wiring work
On 2018-02-09 13:30:39
I am happy that you can line up trivalent white ones as well.
For home use
On 2018-01-13 19:02:11
I think that it is cheap and there is no problem. . It is a repeater. We will also purchase.
Assembly of steel rack
On 2017-12-27 15:07:30
Just tighten the bolts, which makes working easier because there is no need to hit the tool on the nut. However, if you loosen it once, it will be taken from the next.
Close the polycarbonate board to the snowplow board.
On 2017-11-08 21:56:58
Since the size is modularized, there is nothing to say.
To fit the filling of the cultivator Honda FU-400
On 2017-10-30 12:49:05
Purchased together with the round head root angle flange bolt M10-20 to install the tillage claw of the cultivator Honda FU - 400. Genuine parts are very expensive and 28 pieces are necessary to install 14 stuffing, but selling bags here is tremendously saved. It was perfect for this combination and I was able to do it at around half price.
On 2017-10-13 15:56:19
I use it for fastening the parts of the car, but after tightening with moderate torque, it can be used for a long time without loosening.
On 2017-07-24 17:02:16
Selling in subdivision is saved, it is cheaper than buying it at home center
Assembling the machine
On 2017-07-05 22:21:24
There are troublesome scenes that slippage if it is a spring washer in relation to fastening the nut to the other side of the iron plate out of the reach of the eyes, but that point flange nut contributes to work certainty. It is thought that the angle of the brim is appropriate because the tightness at the setting torque is also good.
Reinforcement of iron plate
On 2017-05-07 19:40:40
It is just reinforcement of the hole just fine and it is safe to use as a reinforcing material without escaping owing to the flange. It depends on future weathering.
This review is about item#50319613.
On 2017-04-28 15:38:53
It is cheap and good, but I also feel that it lacks accuracy. It will be appreciated if there are thirty entries.
On 2017-04-27 21:47:55
It is a set of just right to have it for stock.
Assembly of machined products
On 2017-04-14 15:35:05
It is used completely as a product assembly and as a part attached to kit products.
On 2017-03-23 14:42:26
Although it is cheap, it is saved, but even if the unit price gets a little higher, it is easy to buy if you can buy it in a small amount.
Air conditioning control panel assembly
On 2017-02-14 13:38:23
I used it with a pair of bolts, it is convenient without slipping with tightening.
Production of shelves
On 2016-12-09 18:24:43
It was used to assemble the shelf. Purchased with tightening nut of root angle bolt. I really like SUS, but I do not sell this type.
Electrical work (disaster prevention)
On 2016-10-25 18:29:21
Usability is good and I will repurchase
When making a lighting fixture
On 2016-08-03 20:29:42
I bought it from the screw shop but I would like to change it to this.
For automotive mounting bolt nut
On 2016-07-09 11:49:25
It can be used normally. It is saved that a lot of use is available and the price is cheap.
This review is about item#05529124.
Customers Who Viewed This Item Also Bought
8.99 - 25.99 SGD
6.99 - 8.99 SGD
51.99 - 68.99 SGD
6.99 - 8.99 SGD
9.99 - 41.99 SGD