Customer Reviews of Ultra Thin Spanner
The reviews are automatic translation.
Showing 1 - 20 of 42 Reviews
On 2018-04-28 16:12:42
We purchased this product because ordinary thick spanner can not be used, it was okay to add power with a fairly durable construction.
Engine assembly work
On 2018-03-29 16:19:37
The price was cheap, but it was solid. I would like to purchase again.
This review is about item#34756793.
On 2018-03-20 15:20:59
Always I am indebted. I hurriedly made it necessary and purchased.
For tightening of a double nut in a narrow place
On 2018-02-28 20:49:44
Excellent thinness. But it is easy to use as it is solid.
On 2017-12-10 14:36:26
Last time I bought 4 mm thick and could not use it, I bought this. I was able to use it without problems, durability seems to be OK. It was saved because there was a thickness inscription.
On 2017-11-07 15:58:01
The accuracy of the wrench is good and it is difficult to jump, it is easy to price.
To open and close the bolt in a narrow place
On 2017-07-06 22:40:54
It is useful for temporary tightening work. Arm is less tired easily because it is light.
As accessory attachment tool
On 2017-05-24 11:13:21
Cospar is also used highly repeatedly. Plating is beautiful and looks like luxury goods.
Replacement of chair casters
On 2017-03-17 15:51:22
Whether the chair was too old, old casters could not be taken quite easily, and when used for strength, it crooked and it became unusable.
Removal of parts when the gap is small, difficult to handle
On 2017-01-24 17:50:42
Though it is thin as imagined, the construction is also solidly made, and although it is the one of 17 mm size to use mainly, there is not feeling that the mouth of the spanner opens even when tightening, it is handy. After that it is a problem of durability, and when desorbing is repeated, there are many things that will be useless, it is a look at the handsome performance of carbon steel. Either way it is an inexpensive price setting, so if you divide it as a consumable item, I think that it is really an excellent good product of CP.
On 2017-01-15 22:50:38
Purchased for disassembly and maintenance of bicycle pedals. It is necessary to rotate the bearing ball press inside the pedal 10 mm and lock nut 7 mm. An inexpensive plate spanner set purchased later is sufficient and there is not much turn. But it is satisfactory because there is good making.
Painting work etc.
On 2016-11-29 21:17:27
Used to remove the cup brush from Thunder. It is just fine to get into the gap and toughness to remove the closed cup.
On 2016-11-02 20:25:12
In case of bicycle bolt is main inch standard of JIS In that case 14 mm, 15 mm and 17 mm are many between nut surfaces 14 mm and 17 mm spanner is also in the home center How about in 14 mm and 15 mm which is a special shopy like here
On 2016-08-07 11:46:41
Things are good. The durability is about to come.
Working in a narrow place
On 2016-07-21 18:05:27
I am on the Ninja 250R. Since GIVI carriers are attached, there is no gap to enter with a normal wrench even if you try to retighten the nut of the mounting part of the rear turn signal. Since this spanner is 3 mm thick, it enters without any problems. Checking and retightening of each part is necessary for a motorcycle with many vibrations, so it is useful.
For engine maintenance
On 2016-04-07 23:24:38
I used to remove the cylinder block, so I bought it because it is cheap.
Chair replacement for chair
On 2016-04-05 17:56:56
It has enough strength to withstand use, and it is a place where you can not work if it is not this thinness. Even if I contact an office machine maker, it is a tool I did not get a valid reply. I am satisfied.
On 2015-11-29 09:44:09
Since it is not used frequently, it is very cheap. I feel that the intensity is also low over a thin part, but it can be used. There were not many substitutes for this, it was good to buy it rather than sharpening a normal wrench.
Maintenance of machine
On 2015-11-27 18:02:54
Thickness is thin
Screw shaft screw on caster
On 2015-11-17 23:56:13
It can not be used with the thickness of a common wrench, it is used to tighten the screw of the caster. It is safe to use because it seems there is no worry about strength even if it is thin.
Customers Who Viewed This Item Also Bought
62.99 - 109.99 SGD
37.99 - 49.99 SGD
WAGO Company of Japan
45.99 - 69.99 SGD
7.99 - 14.99 SGD