All Products

Materials (tape): Glass fibre into salt vinyl covered edges (edge part : aluminum) Blade part: aluminum, Pricision (mm): 1.5 m +/- 1.9 mm, Tape Length (m): 1.5, Tape Width (mm): 16, Weight (g): 19

Caution: Never use solvents such as thinner, benzine, etc., Never use solvents such as thinner, benzine, etc., Purpose: Gauge to measure bolt and nut size., Gauge to measure bolt and nut size., Weight (g): 55, Measuring Range: 6 to 10, 1/4 inch to 3/4 inches nominal diameter, metric screws: (volts) inch screw M6 to M20 (nut) 1 / 4-5 / 8 inches, Dimension (mm): 107x237x6, Material: Body: ABS resin, Accessories: Inch meter conversion table with

Caution: Confirm it's clean and flat before use., Confirm it's clean and flat before use., Purpose: Measurement of inclination pitch and tilt angle for civil engineering work, drain work and plumbing., Measurement of inclination pitch and tilt angle for civil engineering work, drain work and plumbing., Storage Temperature (degree c): -25 to 60, Accuracy (mm/m): + / -17.5 = + /-1.0degree within, Sensitivity (mm/m): 0.7=0.0401degree , Weight (g): 80, Color: Blue, Dimension (mm): 109x235x18, Material: Body / ABS resin, bubble tube / glass, liquid / liquid petroleum

Caution: Do not use other than intended purpose., Do not use other than intended purpose., Purpose: Electric circular saw’s guide ruler (square cut), Electric circular saw’s guide ruler (square cut), 2014 TRUSCO Published Page: 1-0902

Purpose: Used the right angle of the inside and outside corners, it is used to verify the right angle of processing materials and products., Used the right angle of the inside and outside corners, it is used to verify the right angle of processing materials and products., Used the right angle of the inside and outside corners, it is used to verify the right angle of processing materials and products., Used the right angle of the inside and outside corners, it is used to verify the right angle of processing materials and products., Stand Thickness (mm): 8, Stand Width (mm): 18, Stand Length (mm): 94, Pole Width (mm): 18, Material (Unit): SUS410, Material (Rod): SUS420J2 , Pole Thickness (mm): 1.5, Shape: Right angle flat type

Caution: Attached battery is for monitor. May have only short lifespan., Attached battery is for monitor. May have only short lifespan., Attached battery is for monitor. May have only short lifespan., Attached battery is for monitor. May have only short lifespan., Batteries: 9V 6P type battery

Core Material: Crayon, Core Diameter (mm): 2, Weight (g): 12, Material (Body): Plastic

Thread Automatic Rolling-up Length (m): 8, Main Part Dimension (mm): 180x76x45.5, Weight (g): 185

Dimension (Width W x Thickness) (mm): 26.1x17.2

Caution: Adsorbability changes depends on metal strip thickness, coating thickness and rust thickness. Lift up with confirming there is no risk of falling. Absolutely keep away from direction compasses, clocks, cards, precision machinery, etc. It will be damage, Adsorbability changes depends on metal strip thickness, coating thickness and rust thickness. Lift up with confirming there is no risk of falling. Absolutely keep away from direction compasses, clocks, cards, precision machinery, etc. It will be damage, Purpose: Used for picking up scattered nails and metal pieces. Work can be done quickly and safely. Due to recycling, there is an available selection of steel and aluminum cans., Used for picking up scattered nails and metal pieces. Work can be done quickly and safely. Due to recycl...

Caution: Adsorbability changes depends on metal strip thickness, coating thickness and rust thickness. Lift up with confirming there is no risk of falling. Absolutely keep away from direction compasses, clocks, cards, precision machinery, etc. It will be damage, Adsorbability changes depends on metal strip thickness, coating thickness and rust thickness. Lift up with confirming there is no risk of falling. Absolutely keep away from direction compasses, clocks, cards, precision machinery, etc. It will be damage, Purpose: Used for picking up scattered nails and metal pieces. Work can be done quickly and safely. Due to recycling, there is an available selection of steel and aluminum cans., Used for picking up scattered nails and metal pieces. Work can be done quickly and safely. Due to recycl...

Purpose: Inspection mirror. Supporting light Tool to pick up screws on crevices, Inspection mirror. Supporting light Tool to pick up screws on crevices, Luminous Intensity (mcd): 27000, Adsorption Strength (N [kgf]): Point s / 10 [1], bottom / 20 [2], Main Part Dimension (mm): phi 18 X 560 (INSPECTION MIRROR MOUNTING: LONGEST / 630), Power: ALKALINE BATTERY LR 44 X 3 PIECES, Weight (g): 150, Material: Grip / aluminum Flexible tube/iron Inspection mirror/glass, ABS and PP resin Magnet / neodymium, TRUSCO Part Number: 403-1873

Material: Stainless

Rear Side Scale (short branches): (Outside) 25cm, (inside) 20cm, Rear Side Scale (long branches): (Outside) 50cm, (inside) 40cm, Front Side Scale (short branches): (Outside) 25cm, (inside) 20cm, Front Side Scale (long branches): (Outside) 50cm, (inside) 45cm, Tolerance (mm): total length+/-0.2 mm, Measuring Range (cm): 0 - 50, JIS Standard: Permit No. 372027 / CN9510, Length 2 (mm): 520, Length 1 (mm): 260, Perpendicularity: does not exceed the +/-0.1mm with 100mm , Type: Carpenter's squareuare 50 cm (front and back cm scale) for iron work, Weight (g): 88, Thickness (mm): 1.4, Width (mm): 15, Shape: Same thickness, Material: Stainless steel SUS420J2, Specification: With Number written in red character Chinese zodiac marks as marker, Application: For ironworks

Material: Iron ABS resin

Type: Pen type needle-tip w/super-hard tip, Weight (g): 12, Overall Length (mm): 140, Shaft Diameter (phi mm): 8, Material: Body: ABS resin, TRUSCO Part Number: 332-6136

Weight (g): 27, Dimension (mm): phi50(84x54)x10, Material: Body / acrylic Surface / acetyl (covering the frequency Edition)

Yarn thickness (mm): phi1, Thread Length (m): 15, Material: Nylon

Material (stopper): Brass, Material (Body): Stainless steel (silver finish)

Tape Width (mm): 25

Purpose: Used for measurement and scribing of angles., Used for measurement and scribing of angles., Used for measurement and scribing of angles., Used for measurement and scribing of angles., Pitch Scale (Degree): 1, Dimensions (Diameter phi x Thickness) (mm): 120x1.5 (minute degree board), Pole Length (mm): 245, Material (Screwed Part): Brass, Weight (g): 150, Material (Body): Stainless steel SUS420J2, TRUSCO Part Number: 408-3458

Purpose: Flatness measurement, parallelism measurement, eccentric measurement dial gauge., Flatness measurement, parallelism measurement, eccentric measurement dial gauge., Flatness measurement, parallelism measurement, eccentric measurement dial gauge., Flatness measurement, parallelism measurement, eccentric measurement dial gauge., 1/10 Rotation Adjacent Error (micrometer): 8, (Indication Error) Total Measuring Range (microm): 18, Return Error (microm): 5, Scale Specification: +/-0-50-100, Measuring Force (N): 1.5 or less, Scale Interval (mm): 0.01, Measuring Range (mm): 0 to 10, Weight (g): 100, Dimension (mm): 107x55x44, Material: Body: Steel ABS resin

Caution: Please do not use as a clinical thermometer., Please do not use as a clinical thermometer., Please do not use as a clinical thermometer., Please do not use as a clinical thermometer., Purpose: Infrared thermometer. Measure temperature without touching object., Infrared thermometer. Measure temperature without touching object., Infrared thermometer. Measure temperature without touching object., Infrared thermometer. Measure temperature without touching object., Battery life (hours): Continuous use 14, Pricision (deg C): + / (Applies a higher number) + / -2 or -2%, Power: AAA alkaline batteries two, Dimension (mm): 185x46x143, Material: Body: ABS resin

Purpose: Stand for holding dial gauge and test indicator., Stand for holding dial gauge and test indicator., Adsorption Strength (N [kgf]): 600[60], Mounting Hole Diameter (phi mm): 60/8.1, Dimension (mm): 235x80x58, Material: Body: cast iron

Minimum Scale (mm): 0.05

Caution: Absorbability is indication. Attach magnetic force protective plate on magnet during storage, or it may lose magnetic force., Absorbability is indication. Attach magnetic force protective plate on magnet during storage, or it may lose magnetic force., Material: High carbon steel