Due to the national holidays as Golden Week, we will close 2017/5/3~2017/5/5. This may cause delays with our responses. Thank you for your understanding.

Buy more than* S$200* and get FREE SHIPPING

Air Nozzle

Sort by:
Showing 1 - 30 of 39 Results
Show: 30 60 90
VIEW: Grid View List View
TAIFUJet Resin Air Nozzle Compressor Specification Flat, Width 42mm
Ikeuchi
5.00(2)
26.04 SGD
ADD TO CART
Nozzle Width (mm): 42, Nozzle Mounting Part: R1/4, Air Consumption (NL/min): 440 (0.3MPa at the time), Heat-Resistant Temperature (deg C): 130, Pore Diameter (phi mm) x Number: 1.0x16, Nozzle Length (mm): 90, Maximum Working Pressure (MPa): 0.7, Screw Diameter: R1/4, Weight (g): 30, Material: PPS resin, TRUSCO Part Number: 393-8671
Category Air Nozzle
TAIFUJet Resin Air Nozzle Compressor Specification Flat, Width 24mm Compact
Ikeuchi
5.00(1)
15.82 SGD
ADD TO CART
Nozzle Mounting Part: R1/8, Air Consumption (NL/min): 225 (0.3MPa at the time), Screw Diameter: R1/4, Overall Length (mm): 30, Width (mm): 24, TRUSCO Part Number: 364-0710
Category Air Nozzle
Standard Flat Spray Nozzle
Ikeuchi
10.02 SGD
ADD TO CART
Screw Size: R1/4, Spray Volume (L/min): 1.0(0.3MPa), Angle (Degree): Spray / 90 (0.3MPa), Working Pressure (MPa): (Standard) 03, Hexagon Opposite Side(mm): 14, Weight (g): 16, Overall Length (mm): 25, TRUSCO Part Number: 391-8220
Category Air Nozzle
Ikeuchi Standard Flat Spray Nozzle SUS303 1/4 90 deg
Ikeuchi
5.00(1)
8.47 - 10.16 SGD
Screw Size: R1/4, Spray Angle: 90 degree (0.3MPa), Hexagon Opposite Side(mm): 14, Screw Diameter: R1/4, Weight (g): 21, Overall Length (mm): 25, Material: Stainless
Category Air Nozzle
Full Cone Spray Nozzle Wide Angle Type SUS303
Ikeuchi
4.00(3)
9.68 - 10.51 SGD
Material: Stainless
Category Air Nozzle
Ikeuchi Round Type Air Nozzle, PP Resin 1/4 Male phi1.0
Ikeuchi
13.92 SGD
ADD TO CART
Nozzle Mounting Part: R1/4, Air Consumption (NL/min): 245 (0.3MPa at the time), Nozzle Diameter (phi mm): 1, Nozzle Length (mm): 27, Screw Diameter: R1/4, TRUSCO Part Number: 364-0663
Category Air Nozzle
Ball Joint, PP Resin
Ikeuchi
5.00(1)
13.37 - 17.41 SGD
Maximum Diameter (phi mm): 32
Category Air Nozzle
Ikeuchi Round Type Air Nozzle, SUS316L 1/4 Male phi1.6
Ikeuchi
38.28 SGD
ADD TO CART
Nozzle Mounting Part: R1/4, Air Consumption (NL/min): 630 (0.3MPa at the time), Nozzle Diameter (phi mm): 1.6, Nozzle Length (mm): 25, Screw Diameter: R1/8, TRUSCO Part Number: 364-0701
Category Air Nozzle
Ikeuchi Round Type Air Nozzle, SUS316L 1/8 Male phi0.8
Ikeuchi
29.24 SGD
ADD TO CART
Nozzle Mounting Part: R1/8, Air Consumption (NL/min): 155 (0.3MPa at the time), Nozzle Diameter (phi mm): 0.8, Nozzle Length (mm): 20, Screw Diameter: R1/8, TRUSCO Part Number: 364-0728
Category Air Nozzle
It made clogging eliminate KatachiTakashi cone nozzle PPS resin
Ikeuchi
4.50(2)
6.82 - 6.91 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Air Nozzle
Flat Air Nozzle
EVERLOY
4.00(3)
19.31 SGD
Purpose: Uniform draining, uniform drying, uniform cooling, air curtain, cleaning, etc., Mounting Size: R1/4, Heat-Resistant Temperature (deg C): 110, Weight (g): 15, Material: Resin
Category Air Nozzle
Flat Air Nozzle
EVERLOY
87.94 SGD
ADD TO CART
Purpose: Uniform draining, uniform drying, uniform cooling, air curtain, cleaning, etc., Minimum Passage Diameter (phi mm): 0.9, Air Flow Rate (L/min): 470(0.3MPa), Mounting Size: R1/4, Heat-Resistant Temperature (deg C): 200, Weight (g): 62, Material: Aluminum
Category Air Nozzle
Flat Air Nozzle
EVERLOY
5.00(2)
10.70 - 10.84 SGD
Mounting Size: R1/4, Heat-Resistant Temperature (deg C): 250, Hexagon Opposite Side(mm): 14, Weight (g): 25
Category Air Nozzle
1-fluid nozzle / flat type (wide-angle)
EVERLOY
22.16 - 27.73 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Heat-Resistant Temperature (deg C): 250, Spray Angle: 140degree
Category Air Nozzle
Two-fluid nozzle / spot type
EVERLOY
279.90 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Heat-Resistant Temperature (deg C): 250, Weight (g): 35, Joint Size: Rc1/8
Category Air Nozzle
For the two-fluid nozzle / coating
EVERLOY
409.90 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Minimum Passage Diameter (phi mm): 1.1, Tube Connection Caliber (mm): 4, Spraying Volume (mL/min): 1-20, Air Consumption (L/min): 10(0.3MPa), Weight (g): 26
Category Air Nozzle
Ball Joint SUS303
Ikeuchi
3.00(1)
66.13 - 70.37 SGD
Category Air Nozzle
Flat Air Nozzle
Ikeuchi
229.90 SGD
ADD TO CART
Caution: * Compressor specification., Purpose: Drained and dry. Blowing off dust. Air cooling. Cleaning. Peeling. Air curtain., 2015 Trusco Published Pages: 2 1797, 2014 TRUSCO Published Page: 2-1637, Nozzle Mounting Part: R1/4, Air Consumption (NL/min): 440 (at 0.3MPa), Screw Diameter: R1/4, Weight (g): 144, Overall Length (mm): 90, Width (mm): 42, TRUSCO Part Number: 364-0655
Category Air Nozzle
Round Air Nozzle
Ikeuchi
29.24 SGD
ADD TO CART
Caution: Compressor specification., Purpose: Drained and dry. Blowing off dust. Air cooling. Cleaning. Peeling. Air curtain., 2014 TRUSCO Published Page: 2-1637, Nozzle Mounting Part: R1/8, Air Consumption (NL/min): 245(0.3MPaatthetime), Nozzle Diameter (phi mm): 1, Nozzle Length (mm): 20, Screw Diameter: R1/8, TRUSCO Part Number: 364-0736
Category Air Nozzle
Round Air Nozzle
Ikeuchi
29.24 SGD
ADD TO CART
Caution: Compressor specification., Purpose: Drained and dry. Blowing off dust. Air cooling. Cleaning. Peeling. Air curtain., 2014 TRUSCO Published Page: 2-1637, Nozzle Mounting Part: R1/8, Air Consumption (NL/min): 480(0.3MPaatthetime), Nozzle Diameter (phi mm): 1.4, Nozzle Length (mm): 20, Screw Diameter: R1/8, Weight (g): 12, TRUSCO Part Number: 364-0752
Category Air Nozzle
Wide Angle Flat Spray Nozzle SUS303
Ikeuchi
4.50(2)
11.78 - 23.73 SGD
Category Air Nozzle
Air nozzle (fan-type) made of SUS304
Ikeuchi
18.01 - 19.30 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Air Nozzle
Submerged injection nozzle PP resin
Ikeuchi
22.16 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Normal Opreration Pressure: 0.05
Category Air Nozzle
Made equally fan-shaped nozzle SUS303
Ikeuchi
5.00(1)
11.13 - 12.51 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Normal Opreration Pressure: 0.3
Category Air Nozzle
Steel sector for air steam nozzle SUS303
Ikeuchi
20.72 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Screw Size: R1/4, Spray Angle: 90degree, Normal Opreration Pressure: 0.3, Weight (g): 44
Category Air Nozzle
Charge pyramid nozzle SUS303-made knife
Ikeuchi
28.09 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Screw Size: Rc3/8, Spray Volume (L/min): 7, Spray Adjustment: 100degree, Normal Opreration Pressure: 0.2, Weight (g): 70
Category Air Nozzle
Air nozzle flat type compact type (resin PPS)
EVERLOY
13.92 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Purpose: Draining, drying, cooling, dust removal, foreign body removal, cleaning, air curtain, Minimum Passage Diameter (phi mm): 1.0, Mounting Size: R1/8, Heat-Resistant Temperature (deg C): 130, Maximum Working Pressure (MPa): 0.7, Weight (g): 5, Material: PPS
Category Air Nozzle
Air nozzle flat type blower type (resin PPS)
EVERLOY
27.73 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Material: PPS
Category Air Nozzle
Moya nozzle (SUS303)
EVERLOY
65.92 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Purpose: Cooling, humidification, etc.., Minimum Passage Diameter (phi mm): 0.15, Flow Rate (mL/min): 21-50, Mounting Screw: 1/4, Working Pressure (MPa): 2-6, Material: SUS303
Category Air Nozzle

1 2 Next