Due to the national holidays as Golden Week, we will close 2017/5/3~2017/5/5. This may cause delays with our responses. Thank you for your understanding.

Buy more than* S$200* and get FREE SHIPPING

Hydraulic Pressure Hose

Sort by:
Showing 1 - 30 of 87 Results
Show: 30 60 90
VIEW: Grid View List View
Linemate Hose 3130-03
Nitta Moore
4.50(2)
19.02 - 289.90 SGD
Inner Diameter (mm): 4.8, Outer Diameter (mm): 10.4, Inside Diameter (inch): 3/16, Minimum Bending Radius (mm): 30
Category Hydraulic Pressure Hose
Linemate Hose 3130-04
Nitta Moore
15.82 - 289.90 SGD
Inner Diameter (mm): 6.3, Outer Diameter (mm): 12.4, Inside Diameter (inch): 1/4, Name: 04, Minimum Bending Radius (mm): 40, Maximum Working Pressure (MPa): 20.0
Category Hydraulic Pressure Hose
Linemate Hose 3130-06
Nitta Moore
5.00(1)
24.70 - 419.90 SGD
Inner Diameter (mm): 9.5, Outer Diameter (mm): 16.1, Minimum Bending Radius (mm): 60
Category Hydraulic Pressure Hose
Linemate Hose 3130-08
Nitta Moore
41.07 - 519.90 SGD
Inner Diameter (mm): 12.7, Outer Diameter (mm): 19.9, Minimum Bending Radius (mm): 80
Category Hydraulic Pressure Hose
Linemate Hose 1000-06
Nitta Moore
5.00(1)
15.77 - 279.90 SGD
Inner Diameter (mm): 9.5, Outer Diameter (mm): 14.0, Inside Diameter (inch): 3/8, Name: 06, Minimum Bending Radius (mm): 60, Maximum Working Pressure (MPa): 10.5
Category Hydraulic Pressure Hose
Linemate Hose 1000-04
Nitta Moore
5.00(3)
11.52 - 189.90 SGD
Inner Diameter (mm): 6.3, Outer Diameter (mm): 10.4, Minimum Bending Radius (mm): 30, Maximum Working Pressure (MPa): 10.5
Category Hydraulic Pressure Hose
Rubber Hose for Oil, "PASCALART PA0704"
Bridgestone
4.67(6)
23.65 - 56.24 SGD
Purpose: For general hydraulic piping
Category Hydraulic Pressure Hose
PASCALART PA2104, Both End Metal Fittings F
Bridgestone
5.00(2)
26.21 - 78.35 SGD
Category Hydraulic Pressure Hose
PASCALART PA2104, Both End Metal Fittings C
Bridgestone
5.00(2)
26.21 - 789.90 SGD
Metal Mouth Ring Length (L) (mm): 56, Recommended Ambient Temperature (degree C): -40 to +70, Hose Outer Diameter (mm): 13.8, Fluid Temperature Range (Degree c): -40 to +100, Reinforcing Layer: 1W, Compatible Fluid: Mineral hydraulic oil, Dimensions Y (mm): 17, Hose Inside-Diameter (phi mm): 6.3, Dimention X (mm): 19, Minimum Bending Radius (mm): 70, Maximum Working Pressure (MPa): 20.5, Screw Diameter: G1/4
Category Hydraulic Pressure Hose
N5 Nylon Tubing
Nitta Moore
5.00(1)
36.87 - 469.90 SGD
Negative Pressure Performance (kPa): -101.294, Maximum Working Pressure (MPa): 0.8(at20deg C), Operating Temperature Range (deg C): (Air)-40 to +100,(Water)0 to +50,(General hydraulic oil)-40 to +100
Category Hydraulic Pressure Hose
Pascalart Pa2106, Both End Metal Fittings F
Bridgestone
5.00(4)
33.87 - 109.90 SGD
Purpose: For general hydraulic piping, Metal Mouth Ring Length (L) (mm): 62, Reinforcing Layer: 2W, Dimensions Y (mm): 19, Hose Inside-Diameter (phi mm): 9.5, Dimention X (mm): 22, Minimum Bending Radius (mm): 90, Maximum Working Pressure (MPa): 20.5, Screw Diameter: G3/8
Category Hydraulic Pressure Hose
Hydraulic Pressure Hose
Bridgestone
5.00(1)
32.09 - 85.81 SGD
Purpose: For general hydraulic piping, Metal Mouth Ring Length (L) (mm): 62, Recommended Ambient Temperature (degree C): -40 to +70, Hose Outer Diameter (mm): 16.6, Fluid Temperature Range (Degree c): -40 to +100, Reinforcing Layer: 1W, Dimensions Y (mm): 19, Hose Inside-Diameter (phi mm): 9.5, Dimention X (mm): 22, Minimum Bending Radius (mm): 75, Screw Diameter: G3/8
Category Hydraulic Pressure Hose
 Hydraulic Hoses K-140-09 Double Ended Fitting 05
Togawa Rubber
4.40(5)
27.70 - 73.81 SGD
Dimension HEX(mm): 22, Hose Outer Diameter (mm): 17.5, Available Atmosphere Temperature (degree c): -40 to +70, Fluid Temperature Range (Degree c): -40 to +100, Maximum Dynamic Pressure (MPa): 20.5, Reinforcing Layer: 1W, Minimum Burst Pressure (MPa): 68.6, Screw T: G3/8, Hose Inside-Diameter (phi mm): 9.5, Name: 9, Dimensions C (mm): 10.5, Minimum Bending Radius (mm): 115, Dimensions L (mm): 65
Category Hydraulic Pressure Hose
Hydraulic Hose K-140-09, Double End Fitting 05 + Adapter
Togawa Rubber
30.85 - 68.74 SGD
Caution: In cases where the hose is a straight line, the length up until the tip of the double ended fitting (coupling) is l. The length is not included during adapter assembly., Purpose: For general hydraulic piping, Screw Inner Caliber (mm): 7.0, Dimension HEX(mm): 22, Mass (g/m): Hose/400, Hose Outer Diameter (mm): 17.5, Maximum Dynamic Pressure (MPa): 20.5, Reinforcing Layer: 1W, Minimum Burst Pressure (MPa): 68.6, Screw T: G3/8, Dimensions I (mm): 31, Hose Inside-Diameter (phi mm): 9.5, Name: 9, Dimensions C (mm): 10.5, Minimum Bending Radius (mm): 115, Maximum Working Pressure (MPa): 14.0, Dimensions L (mm): 65
Category Hydraulic Pressure Hose
Hydraulic Hose K-70-06, Ends 05 + Adapter Stage
Togawa Rubber
22.68 - 45.71 SGD
Caution: In cases where the hose is a straight line, the length up until the tip of the double ended fitting (coupling) is l. The length is not included during adapter assembly., Purpose: For general hydraulic piping
Category Hydraulic Pressure Hose
Hydraulic Hose K-210-09
Togawa Rubber
5.00(2)
35.36 - 84.31 SGD
Caution: In cases where the hose is a straight line, the length up until the tip of the double ended fitting (coupling) is l. The length is not included during adapter assembly., Purpose: For general hydraulic piping, Screw Inner Caliber (mm): 7.0, Dimension HEX(mm): 22, Mass (g/m): Hose/615, Hose Outer Diameter (mm): 19.1, Maximum Dynamic Pressure (MPa): 30.9, Reinforcing Layer: 2W, Minimum Burst Pressure (MPa): 103, Screw T: G3/8, Dimensions I (mm): 31, Hose Inside-Diameter (phi mm): 9.5, Name: 9, Dimensions C (mm): 10.5, Minimum Bending Radius (mm): 130, Maximum Working Pressure (MPa): 20.5, Dimensions L (mm): 65
Category Hydraulic Pressure Hose
Hydraulic Hoses K-210-12, Double Ended Fitting 05
Togawa Rubber
4.50(4)
58.71 - 129.90 SGD
Purpose: For general hydraulic piping, Dimension HEX(mm): 27, Hose Outer Diameter (mm): 22.2, Maximum Dynamic Pressure (MPa): 30.9, Reinforcing Layer: 2W, Minimum Burst Pressure (MPa): 103, Screw T: G1/2, Hose Inside-Diameter (phi mm): 12.7, Dimensions C (mm): 11.5, Minimum Bending Radius (mm): 160, Maximum Working Pressure (MPa): 20.5, Dimensions L (mm): 70
Category Hydraulic Pressure Hose
N2 nylon tube (mm size)
Nitta Moore
5.00(1)
26.07 - 849.90 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Negative Pressure Performance (kPa): -101.294
Category Hydraulic Pressure Hose
N5 nylon tube (mm size)
Nitta Moore
129.90 - 209.90 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Negative Pressure Performance (kPa): -101.294, Length (m): 100
Category Hydraulic Pressure Hose
Hydraulic Hose K-70-06
Togawa Rubber
1.00(1)
21.26 - 43.20 SGD
Purpose: For general hydraulic piping, Dimension HEX(mm): 19, Hose Outer Diameter (mm): 13.3, Available Atmosphere Temperature (degree c): -40 to +70, Fluid Temperature Range (Degree c): -40 to +100, Maximum Dynamic Pressure (MPa): 10.3, Reinforcing Layer: 1W, Minimum Burst Pressure (MPa): 34.5, Screw T: G1/4, Hose Inside-Diameter (phi mm): 6.3, Name: 6, Dimensions C (mm): 5.5, Minimum Bending Radius (mm): 80, Dimensions L (mm): 60
Category Hydraulic Pressure Hose
Hydraulic Hose K-70-09
Togawa Rubber
30.31 - 57.64 SGD
Purpose: For general hydraulic piping, Dimension HEX(mm): 22, Hose Outer Diameter (mm): 17.5, Available Atmosphere Temperature (degree c): -40 to +70, Fluid Temperature Range (Degree c): -40 to +100, Maximum Dynamic Pressure (MPa): 10.3, Reinforcing Layer: 1W, Minimum Burst Pressure (MPa): 34.5, Screw T: G3/8, Dimensions I (mm): 31, Hose Inside-Diameter (phi mm): 9.5, Name: 9, Dimensions C (mm): 10.5, Minimum Bending Radius (mm): 110, Dimensions L (mm): 65
Category Hydraulic Pressure Hose
Hydraulic Hose K-210-09
Togawa Rubber
5.00(1)
29.64 - 85.97 SGD
Purpose: For general hydraulic piping, Dimension HEX(mm): 22, Hose Outer Diameter (mm): 19.1, Available Atmosphere Temperature (degree c): -40 to +70, Fluid Temperature Range (Degree c): -40 to +100, Maximum Dynamic Pressure (MPa): 30.9, Reinforcing Layer: 2W, Minimum Burst Pressure (MPa): 103, Screw T: G3/8, Hose Inside-Diameter (phi mm): 9.5, Name: 9, Dimensions C (mm): 10.5, Minimum Bending Radius (mm): 130, Maximum Working Pressure (MPa): 20.5, Dimensions L (mm): 65
Category Hydraulic Pressure Hose
Line Mate Hose 1400 - 06
Nitta Moore
5.00(1)
319.90 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Inner Diameter (mm): 9.5, Outer Diameter (mm): 14.0, Inside Diameter (inch): 3/8, Name: 06, Minimum Bending Radius (mm): 60, Maximum Working Pressure (MPa): 14.0, Length (m): 20
Category Hydraulic Pressure Hose
Linemate Hose 1400-04
Nitta Moore
14.95 - 229.90 SGD
Inner Diameter (mm): 6.3, Outer Diameter (mm): 10.4, Minimum Bending Radius (mm): 30
Category Hydraulic Pressure Hose
Linemate Hose 3130-02
Nitta Moore
11.77 - 199.90 SGD
Inner Diameter (mm): 3.6, Outer Diameter (mm): 8.3
Category Hydraulic Pressure Hose
Line Mate Hose 1000 - 08
Nitta Moore
15.91 - 339.90 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Inner Diameter (mm): 12.7, Outer Diameter (mm): 17.4, Inside Diameter (inch): 1/2, Name: 08, Minimum Bending Radius (mm): 80, Maximum Working Pressure (MPa): 10.5
Category Hydraulic Pressure Hose
Hydraulic Hose K-70-06
Togawa Rubber
5.00(2)
21.46 - 45.25 SGD
Screw Inner Caliber (mm): 4.0, Dimension HEX(mm): 19, Hose Outer Diameter (mm): 13.3, Available Atmosphere Temperature (degree c): -40-+70, Fluid Temperature Range (Degree c): -40-+100, Maximum Dynamic Pressure (MPa): 10.3, Reinforcing Layer: 1W, Minimum Burst Pressure (MPa): 34.5, Screw T: G1/4, Hose Inside-Diameter (phi mm): 6.3, Name: 6, Dimensions C (mm): 8.5, Minimum Bending Radius (mm): 80, Maximum Working Pressure (MPa): 7.0, Dimensions L (mm): 60
Category Hydraulic Pressure Hose
Hydraulic hose K-70-19 (both ends bracket 05)
Togawa Rubber
92.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Screw Inner Caliber (mm): 15.5, Dimension HEX(mm): 36, Hose Outer Diameter (mm): 27.8, Available Atmosphere Temperature (degree c): -40-+70, Fluid Temperature Range (Degree c): -40-+100, Maximum Dynamic Pressure (MPa): 10.3, Reinforcing Layer: 1W, Minimum Burst Pressure (MPa): 34.5, Total Length l (mm): 650, Screw T: G3/4, Hose Inside-Diameter (phi mm): 19.0, Name: 19, Dimensions C (mm): 13.5, Minimum Bending Radius (mm): 180, Maximum Working Pressure (MPa): 7.0, Dimensions L (mm): 83
Category Hydraulic Pressure Hose
Hydraulic Hoses K-210-06 Double Ended Fitting 04
Togawa Rubber
5.00(2)
23.76 - 61.26 SGD
Purpose: For general hydraulic piping
Category Hydraulic Pressure Hose
Hydraulic hose K-210-09 (both ends bracket 04)
Togawa Rubber
5.00(2)
37.09 - 62.34 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Screw Inner Caliber (mm): 7.0, Dimension HEX(mm): 22, Hose Outer Diameter (mm): 19.1, Available Atmosphere Temperature (degree c): -40-+70, Fluid Temperature Range (Degree c): -40-+100, Maximum Dynamic Pressure (MPa): 30.9, Reinforcing Layer: 2W, Minimum Burst Pressure (MPa): 103, Screw T: G3/8, Hose Inside-Diameter (phi mm): 9.5, Name: 9, Dimensions C (mm): 6.5, Minimum Bending Radius (mm): 130, Maximum Working Pressure (MPa): 20.5, Dimensions L (mm): 65
Category Hydraulic Pressure Hose

1 2 3 Next

Hydraulic Hose high pressure Related Products

Related Products