Adhesives and Repair Materials

Accessories: Brush is attached to the lid back

Caution: Electrical conductivity in this product. Note electric shock., Purpose: Eco pack caulking gun, Compatible Size: Up to 280mm length (caulk) cylinder, until phi60, capacity 760mL, Material (Grip): Engineers plastic ring, Body Weight (g): 600

Extrusion: 1.5kPa, Compatible Container: 330mL cartridge, Material (handle part): Lightweight resin, Weight (ｋg): 0.68, Material: Cylinder / lightweight aluminum

Main Ingredient: Modified silicone resin, Operating Temperature Range (deg C): -20-120, -20 - 120, Color: White, TRUSCO Part Number: 374-8502

RoHS Directive: Fit, Curing Time (minutes): 30 (120 degC ), 20 (150 degC ), Main Ingredient: Epoxy resin intermediate, Capacity (kg): 1, 1, Color: Fawn, Weight (ｋg): 1, 1, TRUSCO Part Number: 374-8880, 374-8880

Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Weight (g): 400, Capacity (mL): 400, TRUSCO Part Number: 377-7669

Main Ingredient: Modified silicone, Liquid Color: Ash, TRUSCO Part Number: 374-8651

Purpose: For finishing, Construction area (m2): 300/14.8kg, Formaldehyde Class: F , Curing Time (minutes): 60, Type: Curable, Color: Yellow, Ingredients: Synthetic resin-based powder

Construction area (m2): More than 180 / 18kg, Formaldehyde Class: F , Certification Number: MFN over 2746 (the Minister of Land, Infrastructure and Transport approved), Ingredients: Synthetic resin containing starch-based

Construction area (m2): More than 180 / 18kg, Formaldehyde Class: F 4 stars, Certification Number: MFN-0005 (Ministry of Land, Infrastructure and Transport approved), Ingredients: Synthetic resin starch, Specification: No VOC generation

Coating Area (m2): (Spatula painted) about 30/3kg, Standard: JIS F 4 stars, Type: Acrylic resin-based emulsion-based adhesives, Specification: Low VOC

Caution: This product is manufactured in Japanese standards. Please check the specification before you order.

Appearance: White paste, Revision of the Architecture Standard Act (JIS Supported): F ****, Main Ingredient: Modified silicone resin, JIS Standard: JIS A 5538, Standard: JAIA 4VOC standard compliance, Specification: Multi purpose type, fast curing

Standard Coating Amount: 300g/m2, Appearance: White paste, Revision of the Architecture Standard Act (JIS Supported): F ****, Main Ingredient: Modified silicone resin, JIS Standard: JIS A 5538, Standard: JAIA 4VOC standard compliance

2015 Trusco Published Pages: 3 1076, 2014 TRUSCO Published Page: 1-2680, Formaldehyde Class: JAIA over 009832 F , Expansion Ratio: 30 times, Construction length: About 130 m in diameter 2cm, Foam Laminated (L): 36-40, 36-40, Gas Type: HC (CFC-free), Type: Cancer Type 1 solution, Color: Pink, TRUSCO Part Number: 382-3253, 382-3253

Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Unit Dimensions (Length L x Height H)(mm): 238x160, Nozzle Length (mm): 185.3

Coated Area (m2/kg): 0.4 - 0.5 (0.8 - 1.0m 2 / 2kg), Possible Stick Time (min): 5deg C/wighin 120, 23deg C/within 90, 35deg C/within 60, Standard Use Volume: 2.0 to 2.5kg/m2, Main Ingredient: Modified silicone, epoxy resin, Color: Off white, TRUSCO Part Number: 366-8185

Operating Temperature Range (deg C): -40-180

2015 Trusco Published Pages: 3 1072, 2014 TRUSCO Published Page: 1-2677, Color: Charcoal, TRUSCO Part Number: 374-9223

Caution: This product is manufactured in Japanese standards. Please check the specification before you order., TRUSCO Part Number: 374-9240

Caution: This product is manufactured in Japanese standards. Please check the specification before you order.

Volume Change (%): 4, Density: 1.43, Non Volatile Component: 92.10%

Expansion Ratio: about 55, Thermal Conductivity (W/mk): 0.05, Color: Pale yellow

Formaldehyde Class: JAIA-009832 F 4 stars, Expansion Ratio: 30 times, Construction length: About 130 m in diameter 2cm, Foam Laminated (L): 36 - 40, Gas Type: HC (CFC-free), Type: Gun Type 1 solution, Color: Light Green, Weight (ｋg): 1

Curing Time (minutes): 60 (at150 deg C heat curing), Viscosity: Medium viscosity type, Operating Temperature Range (deg C): 0 to 1200, Shape: White paste

2015 Trusco Published Pages: 3 1083, 2014 TRUSCO Published Page: 1-2687, RoHS Directive: Fit, Open Time (sec.): About fifty, Softening Point (dgree c): About 82, Main Ingredient: EVA, EVA, Pieces in Box: 51, 51, Diameter (phi mm): 11.5, 11.5, Color: Fawn, Weight (ｋg): 1.04 (box), Length (mm): 200, 200, TRUSCO Part Number: 382-3512, 382-3512, Compatible: HMGLM1, HMGLM1

Caution: Adhesive (HMSL1K) is sold separately. , Purpose: Cardboard sealing, adhesion of styrofoam and cushioning material, handicraft production., 2015 Trusco Published Pages: 3 1083, 2014 TRUSCO Published Page: 1-2687, Discharge Capacity (kg): 1.0/h, Temperature (Degree c): 130, Nozzle Diameter: Standard: Phi2mm, Body Weight (g): 334, Power Consumption (W): 16, Power (V): AC100, TRUSCO Part Number: 382-3504, Compatible: Adhesives: Henkel low melt stick HMS over L1K type

2015 Trusco Published Pages: 3 0993, 2014 TRUSCO Published Page: 1-2602, Curing Time (minutes): 210, 210, Available Time (minutes): 60, 60, Main Ingredient: Epoxy resin, Operating Temperature Range (deg C): -40-140, -40-140, Type: Heat / chemical resistance, Color: Grayish black, Type: 2-liquid mixing adhesive, TRUSCO Part Number: 384-8370, 384-8370

Color: Red / black