Due to the national holidays as Golden Week, we will close 2017/5/3~2017/5/5. This may cause delays with our responses. Thank you for your understanding.

Buy more than* S$200* and get FREE SHIPPING

Peeling Tools

Sort by:
Showing 1 - 30 of 38 Results
Show: 30 60 90
VIEW: Grid View List View
Flux Chipper
Fuji Air Tools
3.33(3)
199.90 - 309.90 SGD
Hose Mouthpiece Mounting Screw: PT1/4, Stroke (mm): 16 (piston)
Category Peeling Tools > Air Chipper
Air Hammer
Anest Iwata Campbell
5.00(1)
90.69 SGD
ADD TO CART
Size (mm): (Hammer bit)0.401 parker taper, Number of Blows (min-1 [times/min]): 3500, Maximum Working Pressure (MPa): 0.59, Air Consumption (L/min): 310, Body Dimensions (Length x Width x Height) (mm): 170x51x165, Weight (kg): 1.36
Category Peeling Tools > Air Hammer
NPK Air-Powered Chipping Hammer
Nihon Pneumatic Mfg.
419.90 - 889.90 SGD
Category Peeling Tools > Air Chipper
Needle Scaler
Fuji Air Tools
5.00(3)
379.90 - 419.90 SGD
Needle Length (mm): 180, Piston Diameter (phi mm): 25, Blows (Hz): 60, Air Consumption (Nm3/min): 0.18 (at the time of a blow), Hose Nominal Diameter (phi mm): 9.5, Hose Mouthpiece Mounting Screw: PT1/4, Stroke (mm): 20(piston) 7 (needle), Specification: 3-mm needle
Category Peeling Tools > Air Needle Scaler
Jet Chisel
Nitto Kohki
5.00(1)
649.90 SGD
ADD TO CART
Piston Diameter (phi mm): 16, Needle Diameter , Quantity: phi2 X 29, Standard Length of Needle (mm): 150, Working Pressure (MPa [kgf/cm2]): 0.59[6], Air Consumption (m3/min): 0.15, Number of no-load Blows -1: 4000, Main Part Dimension (mm): 158x150, Weight (kg): 1.4, Type: Pneumatic high speed multi needle chisel, TRUSCO Part Number: 116-6000, Specification: Light weight type, Accessories: Needle phi2x 150 mm x 58 pieces (29 mounted on inner main unit) Air hose Assy (with coupler 30PH) x 1 piece Coupler 200 - 30SHx1 piece
Category Peeling Tools > Air Chisel
Air Hammer, Hexal Shaft
Anest Iwata Campbell
4.20(5)
59.89 - 149.90 SGD
Hexagon Opposite Side(mm): 10
Category Peeling Tools > Air Hammer
Flux Chipper
Yokota Kogyo
3.00(1)
189.90 - 219.90 SGD
Purpose: Chipping work of stonework, woodwork, and aluminum., 2014 TRUSCO Published Page: 2-1588, No-load Blows Number (min-1): 12000, Hose Mounting Nozzle: Rc1/4, Working Pressure (MPa): 0.4 to 0.6
Category Peeling Tools > Air Chipper
Automatic Chisel
Nitto Kohki
579.90 SGD
ADD TO CART
Working Pressure (MPa [kgf/cm2]): 0.59[6], Air Consumption (m3/min): 0.3, Number of no-load Blows -1: 2600, Weight (kg): 1.7, Overall Length (mm): 185 (A-300 Main body), Type: High-speed pneumatic chisel, TRUSCO Part Number: 116-6981, Accessories: Flat chisel: 1002 x 1 piece Moil point chisel: 1024 x 1 piece Air hose Assy (with coupler 30PH) x 1 piece Coupler: 200-30SHx1 piece
Category Peeling Tools > Air Chisel
Air Chipper
Nitto Kohki
5.00(1)
319.90 SGD
Working Pressure (MPa [kgf/cm2]): 0.59[6]
Category Peeling Tools > Air Chipper
Jet Chisel, Air-Operated High Speed Multi Needle Chisel
Nitto Kohki
799.90 SGD
ADD TO CART
Piston Diameter (phi mm): 20, Needle Diameter , Quantity: phi2x29, phi3x12, Standard Length of Needle (mm): 180, Working Pressure (MPa [kgf/cm2]): 0.59[6], Air Consumption (m3/min): 0.2, Number of no-load Blows -1: 4000, Weight (kg): 2.75, Overall Length (mm): 244 (Main body), TRUSCO Part Number: 116-6034, Specification: Low vibration type, Accessories: Needle phi3x 180 mm x 24 pieces (12 mounted on inner main unit) Air hose Assy (with coupler 30PH) x 1 piece Coupler 200 - 30SHx1 piece
Category Peeling Tools > Air Chisel
Chipping Hammer
Toku Pneumatic
559.90 SGD
ADD TO CART
2014 TRUSCO Published Page: 2-1590, Piston Diameter (phi mm): 28, Air Inlet(inch): 41706, Air Consumption (m3/min): 0.5, Hose Inside-Diameter (phi mm): 12.7(1/2), Blows (min-1 [times/minute]): 2400, Type: Marukomi, Weight (kg): 5.9, Overall Length (mm): 330, Stroke (mm): 79, TRUSCO Part Number: 332-4907, Specification: Junk size /phi17.45
Category Peeling Tools > Air Hammer
Air Chisel
ESCO
4.67(3)
129.90 SGD
ADD TO CART
Suction Port Size: 1/4inchPT, Indispensability Compressor (kw): 1.5, Air Consumption (L/min): 157, Case Dimension (mm): 320x250x95, Blows (min-1 [times/minute]): 3000, Working Pressure (MPa): 0.64, Weight (kg): 1.6, Overall Length (mm): 210, Stroke (mm): 66, ESCO Part Number: EA159SA
Category Peeling Tools > Air Chisel
Jet Chisel, Air-Operated High Speed Multi Needle Chisel
Nitto Kohki
1,029.90 SGD
ADD TO CART
Piston Diameter (phi mm): 24, Needle Diameter , Quantity: phi2x53, phi3x23, Standard Length of Needle (mm): 180, Working Pressure (MPa [kgf/cm2]): 0.59[6], Air Consumption (m3/min): 0.3, Number of no-load Blows -1: 4000, Weight (kg): 2.7, Overall Length (mm): 237 (Main body), Description 2: Hard steel wire needle that reciprocates at very high speed, 3700 to 6000 times per minute. Lightweight-strong type, optional lineup that meets needs., TRUSCO Part Number: 116-6042, Specification: General-purpose type, Accessories: Needle phi3x 180 mm x 46 pieces (23 mounted on inner main unit) Needle phi2x180mmx106 pieces Needle supporter phi2x1 piece Hexagonal rod spanner 6mm x 1 piece Air hose Assy (with coupler 30PH) x1 piece Coupler 200-30SHx1 piece
Category Peeling Tools > Air Chisel
Jet Chisel
Nitto Kohki
539.90 SGD
ADD TO CART
Needle Diameter , Quantity: phi2x7, phi3x3, Standard Length of Needle (mm): 180, Working Pressure (MPa [kgf/cm2]): 0.59[6], Air Consumption (m3/min): 0.07, Number of no-load Blows -1: 6000, Weight (kg): 0.98, Overall Length (mm): 190 (Main body), Type: Pneumatic high speed multi needle chisel, TRUSCO Part Number: 116-6018, Specification: Compact and light weight type, Accessories: Needle phi3x 180 mm x 3 pieces (mounted on main unit) Air hose Assy (with coupler 30PH) x 1 piece Coupler 200 - 30SHx1 piece
Category Peeling Tools > Air Chisel
Jet Chisel, Air-Operated High Speed Multi Needle Chisel
Nitto Kohki
729.90 SGD
ADD TO CART
Piston Diameter (phi mm): 20, Needle Diameter , Quantity: phi2x29, phi3x12, Standard Length of Needle (mm): 180, Working Pressure (MPa [kgf/cm2]): 0.59[6], Air Consumption (m3/min): 0.2, Number of no-load Blows -1: 4000, Weight (kg): 2.4, Overall Length (mm): 245 (Main body), TRUSCO Part Number: 116-6026, Specification: General-purpose type, Accessories: Needle phi3x 180 mm x 24 pieces (12 mounted on inner main unit) Air hose Assy (with coupler 30PH) x 1 piece Coupler 200 - 30SHx1 piece
Category Peeling Tools > Air Chisel
Air Needle Chisel
ESCO
4.50(2)
259.90 - 609.90 SGD
Working Pressure (MPa): 0.64
Category Peeling Tools > Air Needle Scaler
Exhaust Air Kit
GREAT TOOL
3.20(5)
90.61 SGD
ADD TO CART
Caution: Do not use when air pressured is more than 0.61 MPa Please make sure to wear safety goggles during use, Cape Chisel Dimension (mm x mm): 10.2x125, Air Outlet: 1 / 4PT(Rc) male / PT (R) male, Working Pressure (MPa): 0.61, Air Consumption (L/min): 95, Body Weight (kg): 1.44, Length (Stroke): 66mm, Set Contents: Air gouging body One touch plug 1/4 Sealing tape Oil feed Spring Bit (point chisel, flet chisel, sheet metal chiselA, rivet chisel, sheet metal chiselb) one each
Category Peeling Tools > Air Chisel
Air Chipper
Nitto Kohki
329.90 SGD
ADD TO CART
No-load Blows Number (min-1): 4000, Working Pressure (MPa [kgf/cm2]): 0.59[6], Air Consumption (m3/min): 0.2, Weight (kg): 1.7, Overall Length (mm): 184 (Main body), TRUSCO Part Number: 116-6964, Specification: Pneumatic fixing of tip and machine, Accessories: Bend flat chisel bar (15x155): 1 air-hose Assy(with coupler 30PH):1 coupler 200-30SH:1 piece
Category Peeling Tools > Air Chipper
Eakeren
Ryobi
379.90 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Number of Blows (min-1): 3000, Weight (kg): 1.75, Length (mm): 250
Category Peeling Tools > Air Chisel
Air Hammer
SP AIR Corporation
4.00(1)
289.90 - 379.90 SGD
Purpose: For rust removal of muffler and pipes with each chisel, to cut work of body panel. For chipping operation of concrete, stone, and metal., Exhaust Direction: Front, No-load Blows Number (min-1): 3000, Hose Mounting Nozzle: NPT1/4, Air Consumption (m3/min): 0.3, Working Pressure (MPa): 0.62, Weight (kg): 1.65, Overall Length (mm): 216, Specification: With air regulator
Category Peeling Tools > Air Hammer
New Keren
Nihon Pneumatic Mfg.
749.90 - 779.90 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Piston Diameter (phi mm): 25.4, No-load Blows Number (min-1): 4000, Hose Mounting Nozzle: Rc3/8, Air Consumption (m3/min): 0.45, Working Pressure (MPa): 0.6, Hose Inside-Diameter (phi mm): 9.5, Stroke (mm): 23
Category Peeling Tools > Air Chisel
Air Hammer
Makita
5.00(1)
419.90 SGD
ADD TO CART
Connection Port: Atmospheric pressure coupler, Chisel Caliber (phi mm): 10.2, Air Plug: 20PM type, Hose Inner-Diameter (phi mm): 6.5 or more, Working Pressure (MPa): 0.49 to 0.69, Blows (min-1 [times/minute]): 3600, Weight (kg): 1.1, Overall Length (mm): 122, Accessories: The black finish, there Asari divided
Category Peeling Tools > Air Hammer
NPK Chipper
Nihon Pneumatic Mfg.
469.90 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., No-load Blows Number (min-1): 3200, Weight (kg): 2.4, Overall Length (mm): 273
Category Peeling Tools > Air Chipper
Flux hammer
Nihon Pneumatic Mfg.
5.00(1)
259.90 - 299.90 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Purpose: Steel removal of welding, rust, to drop paint, also woodworking, aluminum of chipping, such as stone carving a wide range of work applications., Hose Mounting Nozzle: Rc1/4, Working Pressure (MPa): 0.6
Category Peeling Tools > Air Chipper
Light Chipping Hammer
Toku Pneumatic
499.90 - 609.90 SGD
Purpose: Civil engineering, construction, architecture concrete chipping work. Deburring work., 2014 TRUSCO Published Page: 2-1590, Hose Mounting Nozzle: Rc3/8, Working Pressure (MPa): 0.59, Hose Inside-Diameter (phi mm): 12.7, Shank: Corner
Category Peeling Tools > Air Hammer
High Speed Air Chisel Bit
Nitto Kohki
919.90 - 969.90 SGD
Chisel Shank (mm): 12.7, Working Pressure (MPa [kgf/cm2]): 0.59[6], Air Consumption (m3/min): 0.27, Number of no-load Blows -1: 2500
Category Peeling Tools > Air Chisel
NPK Chipping Hammer
Nihon Pneumatic Mfg.
419.90 - 669.90 SGD
Installation Shape: Kaku-komi
Category Peeling Tools > Air Chipper
Jet tiger (pneumatic high-speed multi-needle clip)
Nitto Kohki
4.67(3)
1,079.90 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., No-load Blows Number (min-1): 4000, Standard Length of Needle (mm): 180, Working Pressure (MPa [kgf/cm2]): 0.59[6], Air Consumption (m3/min): 0.35, Main Part Dimension (mm): 264x173, Weight (kg): 3.5, TRUSCO Part Number: 116-6778
Category Peeling Tools > Air Chisel
Scaling hammer
Yokota Kogyo
279.90 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Use Hose Diameter (mm): 12.7, Hose Mouthpiece Mounting Screw: 3/8Rc, Air Pressure (MPa): 0.6, Weight (kg): 2.45, Overall Length (mm): 520, TRUSCO Part Number: 209-8024
Category Peeling Tools > Air Hammer
Chipping caulking hammer
Fuji Air Tools
409.90 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Piston Diameter (phi mm): 20.0, Blows (Hz): 50, Hose Nominal Diameter (phi mm): 9.5, Hose Mouthpiece Mounting Screw: PT3/8, Weight (kg): 2.6, Overall Length (mm): 273
Category Peeling Tools > Air Hammer

1 2 Next